Ir a Navegación principal Ir a Navegación en el sitio Ir a Contenido principal
 

Cold Shrink Tubing
   [Ampliar Imagen]

3M's unique cold-shrink products, pre-stretched on a removable core, shrink to fit to ensure a permanent, durable environmental seal and protection.


3M™ COLD SHRINK COAX SEALING KIT CXS-2

Each 3M kit includes a cold shrink EPDM rubber sleeve which is factory-expanded and placed on a removable plastic core. 1/4” - 1 5/8” Cable to 1 1/4” - 1 5/8” Cable 1 1/4” - 1 5/8” Cable to Antenna or Surge Arrestor.

3M™ COLD SHRINK COAX SEALING KIT CXS-4

Each 3M kit includes a cold shrink EPDM rubber sleeve which is factory-expanded and placed on a removable plastic core. 1/4” - 7/8” Cable to Antenna or Surge Arrestor.

3M™ Cold Shrink End Cap EC-1, use range of 0.46–0.82 in (11,6–20,9 mm), 10 per case

Cold Shrink End Cap. Use range of 0.46–0.82 in (11,6–20,9 mm), 10 per case.

3M™ Cold Shrink End Cap EC-2, use range of 0.63–1.18 in (15,9–30,1 mm), 10 per case

Cold Shrink End Cap. Use range of 0.63–1.18 in (15,9–30,1 mm), 10 per case.

3M™ Cold Shrink End Cap EC-3, use range of 1.02–1.94 in (26,0–49,2 mm), 10 per case

Cold Shrink End Cap. Use range of 1.02–1.94 in (26,0–49,2 mm), 10 per case.

3M™ Cold Shrink End Cap EC-4, use range of 1.79–3.32 in (45,5–84,3 mm), 10 per case

Cold Shrink End Cap. Use range of 1.79–3.32 in (45,5–84,3 mm), 10 per case.

3M™ Cold Shrink Insulator 8427-16, Tape, Wire, Unishield, 1 kV, Standard, 10 per case

This splice meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV.

3M™ Cold Shrink Insulator 8430-9, Tape, Wire, Unishield, 1 kV, Standard, 10 per case

3M™ Splice Kits 8420 Series are designed using the unique cold shrink delivery system developed by 3M. Products are supplied pre-stretched on a removable core for efficiency and ease of installation.

3M™ Corrosion Protection Kit CPT-1, Cable Min. O.D. 0.66 in (17 mm), Connector Max. O.D. 2.20 in (56 mm), 10 per case

The sleeve has a 0.66 in (17 mm) O.D. (minimum) and the connector has a (2.20 in (56 mm) maximum O.D. and a 4.80 in (122 mm) maximum installed length.

3M™ Corrosion Protection Kit CPT-1/2, Cable Min. O.D. 0.50 in (13 mm), Connector Max. O.D. 1.60 in (41 mm), 10 per case

The sleeve has a 0.50 in (13 mm) O.D. (minimum) and the connector has a 1.60 in (41 mm) maximum O.D. and a 4.50 in (114 mm) maximum installed length.This corrosion protection kit is designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments. 5 per case.

3M™ Corrosion Protection Kit CPT-2 1/2, Cable Min. O.D. 1.97 in (50 mm), Connector Max. O.D. 4.30 in (109 mm), 5 per case

The sleeve has a 1.97 in (50 mm) O.D. (minimum) and the connector has a 4.30 in (109 mm) maximum O.D. and a 8.50 in (215 mm) maximum installed length.

Cold Shrink Sealing Kits

The 3M™ Cold Shrink Sealing Kits CXS Series offer a safe, easy way to reliably seal connections on coaxial cables. CXS Kits do not require heat, special tools or a time consuming installation procedure.