New Products

• Designed to accommodate typical wiring specifications per Europe and North America suppliers.
• Easy, quick and reliable IDC termination
• Integrated cable retention
• Design accepts multiple wire size diameter
• No special tooling needed
• Latch helps enable rugged field termination
• Compact design saves board space
• High number of mating cycles
• See Regulatory Information Appendix (last page of Tech Data Sheet) for chemical compliance information

• Designed to accommodate typical wiring specifications per Europe and North America suppliers.
• Easy, quick and reliable IDC termination
• Integrated cable retention
• Design accepts multiple wire size diameter
• No special tooling needed
• Latch helps enable rugged field termination
• Compact design saves board space
• High number of mating cycles
• See Regulatory Information Appendix (last page of Tech Data Sheet) for chemical compliance information

• Capable of 6 Gbps per channel data rate
• 26 conductor signal assembly
• Multiple lengths available
• Metal latch designed to promote retention
• Pull tab ring provides easier unmating
• Two levels of EMLB for hot plugging
• Multiple key options available
• Tested to SAS Specification, SAS-2
• See Regulatory Information Appendix (last page of Tech Data Sheet) for chemical compliance information

• Up to 5 Gb/s data rates
• Low crosstalk at high frequencies
• 50/100 Ω (single-ended/differential) impedance
• Modular/scalable format IEC 61076-4-101
• Press-fit headers and receptacles
• 63 mated lines per linear inch
• End-to-end stackable with 5 row 3M™ MetPak™ CP2, HM, and HSHM headers
• Mates with 3M™ MetPak™ HSHM sockets

• Up to 5 Gb/s data rates
• Low crosstalk at high frequencies
• 50/100 Ω (single-ended/differential) impedance
• Modular/scalable format IEC 61076-4-101
• Press-fit headers and receptacles
• 63 mated lines per linear inch
• Dual beam contact construction for high reliability
• End-to-end stackable with 5 row 3M™ MetPak™ CP2, HM, and HSHM headers
• Mates with 5 row 3M™ MetPak™ CP2, HM, and HSHM headers

• Mates to popular 3M MDR 26 position receptacle
• For machine vision camera to frame grabber communications in applications where full CameraLink™ configuration is not necessary
• 3 shielded quads with drains and 5 unshielded twisted pairs
• Entire cable bundle shielded with foil and braid for additional signal protection
• Rugged MDR ribbon type contact for reliable, repeatable connectivity
• Rugged thumbscrew retention
• EMI shielded junction shell

• Mates to popular 3M MDR 26 position receptacle
• For machine vision camera to frame grabber communications in applications where full CameraLink™ configuration is not necessary
• 3 shielded quads with drains and 5 unshielded twisted pairs
• Entire cable bundle shielded with foil and braid for additional signal protection
• Rugged MDR ribbon type contact for reliable, repeatable connectivity
• EMI shielded junction shell

• Mates to popular 3M MDR 26 position receptacle on one end, and to another MDR 26 position cable assembly on the other.
• Male to Female configuration enables use as an extension or Bulkhead/Feed-thru cable.
• For machine vision camera to frame grabber communications in applications where full CameraLink™ configuration is not necessary
• 3 shielded quads with drains and 5 unshielded twisted pairs
• Entire cable bundle shielded with foil and braid for additional signal protection
• Rugged MDR ribbon type contact for reliable, repeatable connectivity
• Rugged thumbscrew retention
• EMI shielded junction shell

• 0.5 mm pitch connector system ideal for applications with limited space
• Floating contact design tolerates application shock, allowing absorption of up to 0.3 mm mated deviance
• Recommended for applications needing more than one connector per daughter board
• 5 mm mated height
• Standard tape & reel packaging
• Keyed design prevents mis-mating

• 0.5 mm pitch connector system ideal for applications with limited space
• Mated height of 3 mm
• Bellows type contact reduces mating stress and insures reliability
• “Tactile click” action assures complete mating and assures high resistance to vibration and shock
• Standard tape & reel packaging

• 0.5 mm pitch connector system ideal for applications with limited space
• Mated heights of 4, 5, & 6 mm
• Bellows type contact reduces mating stress and insures reliability
• “Tactile click” action assures complete mating and assures high resistance to vibration and shock
• Standard tape & reel packaging

• 3 Gbps per channel data rate
• 36 Conductor signal assembly
• Multiple lengths available
• Metal latch designed to ensure retention
• Two levels of EMLB for hot plugging
• 30 AWG Twin Axial Cable
• Universal key
• Tested to SAS Specification, SAS-1.1
• See Regulatory Information Appendix (RIA) for chemical compliance information

• 3.0 Gbps input/output connector for backplane applications
• Two contact mating levels for early-mate and late-break allows "blind mating" or "hot swap" applications
• Capable of accepting HDD fitted with Serial Attached SCSI (SAS) or 3M™ Serial Advanced Technology Attachment (SATA) Plug
• Through-hole power and surface mount signal contacts
• Available with cap for surface mount pick-andplace assembly
• Meets SFF-8482 Specification
• Meets SAS Specification, SAS-1.1
• See Regulatory Information Appendix (RIA)for chemical compliance information

• Complete Shell Kit for 3M™ Shielded Compact Ribbon (SCR) Wiremount Plug (TS-2227). Includes outer body, inner shell, cable clamp, screws and latches
• 360° shielding for excellent EMI protection
• Quick release latch system for connection
security and ease of use
• Integrated strain relieving cable clamp
• See Regulatory Information Appendix (RIA) for chemical compliance information

• Mates to all 3M™ Shielded Compact Ribbon (SCR) Boardmount and Wiremount Plugs
• Polarized to provide proper insertion
• Robust ribbon style contact for reliable, repetitive plugging
• 10 contacts can carry signal or power (up to one ampere per pin)
• Vibration resistant
• Solder termination for quick assembly with no dedicated tooling
• Accommodates up to 18 AWG wire
• See Regulatory Information Appendix (RIA) for chemical compliance information

• Complete Shell Kit for 3M™ Shielded Compact Ribbon (SCR) Wiremount Plug (TS-2225)
• 360° shielding for excellent EMI protection
• Integrated strain relieving cable clamp
• See Regulatory Information Appendix (RIA) for chemical compliance information

• Enables mid-span and extension applications when used in conjunction with the 3M™ Shielded Compact Ribbon (SCR)
Wiremount Receptacle (TS-2227)
• Polarized to provide proper cable insertion
• Robust ribbon style contact for reliable, repetitive plugging
• 360° shielding for excellent EMI protection
• 10 contacts can carry signal or power (up to one ampere per pin)
• Vibration resistant
• Solder termination for quick assembly with no dedicated tooling
• Accommodates up to 22 AWG wire
• See Regulatory Information Appendix (RIA) for chemical compliance information

• Robust ribbon style contact for reliable, repetitive plugging
• Vertical orientation for design flexibility
• Tabs on body provide lateral support to surface mount solder joints and helps enable shield grounding
• 360° shielding for excellent EMI protection
• 10 contacts can carry signal or power (up to one ampere per pin)
• Polarized to provide proper cable insertion
• Vibration resistant
• Mates to 3M™ Shielded Compact Ribbon (SCR) Wiremount Receptacle (TS-2227)
• See Regulatory Information Appendix (RIA) for chemical compliance information

• Robust ribbon style contact for reliable,epetitive plugging
• Body tabs provide lateral support to solder joints and helps enable grounding
• Upright orientation conserves PCB real estate
• 360° shielding for excellent EMI protection
• 10 contacts can carry signal or power (up to one ampere per pin)
• Polarized to provide proper cable insertion
• Vibration resistant
• Mates to 3M™ Shielded Compact Ribbon (SCR) Wiremount Receptacle (TS-2227)
• See Regulatory Information Appendix (RIA) for chemical compliance information

• 3.0 Gbps input/output connector for backplane applications
• Two contact mating levels for early-mate and late-break allows "blind mating" or "hot swap" applications
• Capable of accepting HDD fitted with SAS or Serial Advanced Technology Attachment (SATA) Header
• Meets SFF-8482 Specification
• Meets SAS Specification, SAS-1.1
• RoHS* compliant

• 3.0 Gbps input/output connector for backplane applications
• Two contact mating levels for early-mate and late-break allows "blind mating" or "hot swap" applications
• Capable of accepting HDD fitted with SAS or Serial Advanced Technology Attachment (SATA) Header
• Meets SFF-8482 Specification
• Meets SAS Specification, SAS-1.1
• RoHS* compliant

• Round construction permits easier routing
• 30 AWG wire on .025 inch centers permits mass termination
• Continuous split/bond allows for mass termination on 2.4 inch centers (approximate)
• Close spacing permits higher signal density
• Primary cable is zippable for branching or discrete terminations
• PVC insulation provides excellent flexibility
• Recommended for use with with 0.050" × 0.100" Tripolarized, Wiremount Socket (82XXX-600X), .050" Mini D Ribbon (MDR) Wiremount Plug (101XX-8X00EE) and PAK 50 IDC Sockets (P25E-XXXS-XXX)

• Round construction permits easier routing
• 26 AWG wire on .050 inch centers permits mass termination to broad line of IDC connectors
• Continuous bond and continuous split/bond allows for mass termination of IDC connectors
• Meets external wiring requirements of National Electrical Code, Article 725 (CL2)
• Primary cable is zippable for branching or discrete terminations
• UL listed for USA and Canadian markets

• 6 Gbps aggregate input/output connector for server applications
• Combination receptacle/shell assembly to facilitate board assembly
• Multiple tail types and lengths available on shell guide
• Multiple keying options available
• Meets SFF-8086 Specification
• Meets SAS Specification, SAS-1.1
• See Regulatory Information Appendix (RIA) for chemical compliance information

• 6 Gbps aggregate input/output connector for server applications
• Combination receptacle/shell assembly to facilitate board assembly
• Multiple tail types and lengths available on shell guide
• Multiple keying options available
• Meets SFF-8086 Specification
• Meets SAS Specification, SAS-1.1
• See Regulatory Information Appendix (RIA) for chemical compliance information

• Double-beam normally-closed contact delivers balanced, opposing forces to solder ball with minimal shear stress
• Contact tips touch ball above its center plane moving ball deformation away from seating plane
• Designed to allow excellent air flow around device
• Includes a retractable locating guide for easy board mounting even with hundreds of leads
• Compatible with most robotic handlers
• Helps provide easy manual operation
• See Regulatory Information Index (RIA) for chemical compliance information

• Wiper-on-wiper contact for reliable repetitive plugging
• Rugged die cast metal case construction
• Ground lock for reliable PCB retention
• Interface latch design for connection stability
• 68 contacts
• Reverse pin layout pattern SCSI-2 layout compatible
• See Regulatory Information Appendix (RIA) for chemical compliance information

• Wiper-on-wiper contact for reliable repetitive plugging
• MDR digital LCD interface as a 20 or 26 contact connector
• IEEE 1284C Interface as a 36 contact connector
• Accepts a wide variety of cable constructions including flat, round, twisted pair and twinax cables
• Accepts a wide variety of shielded junction shells
• Contacts: 14, 20, 26, 36, 40, 50, 68, 80 and 100
• See Regulatory Information Appendix (RIA) for chemical compliance information

• 6 Gb/s input/output connector for server applications
• Surfacemount termination on receptacle
• Multiple tail types available for board assembly on shell guide
• Multiple pin lengths for a range of board thicknesses on shell guide
• Multiple backshell polorization options for cable assemblies on shell guide
• Meets SFF-8086 Specification
• Meets SAS Specification, SAS-1.1
• See Regulatory Information Appendix (RIA) for chemical compliance information

• 6 Gb/s input/output connector for server applications
• Surfacemount termination on receptacle
• Multiple tail types available for board assembly on shell guide
• Multiple pin lengths for a range of board thicknesses on shell guide
• Multiple backshell polorization options for cable assemblies on shell guide
• Meets SFF-8086 Specification
• Meets SAS Specification, SAS-1.1
• See Regulatory Information Appendix (RIA) for chemical compliance information

• 6 Gb/s input/output connector for server applications
• Surfacemount termination on receptacle
• 1 1 and 2 2 screw mounted cages available for EMI shielding
• Meets SFF-8086 Specification
• Meets SAS Specification, SAS-1.1
• See Regulatory Information Appendix (RIA) for chemical compliance information

• Thirteen pin counts ranging from 6 to 50 positions
• Latch/eject mechanism maintains a secure connection
• Roll pins retain latches to body in shipping and high vibration environments
• Ejector helps make removal of assemblies easy
• Latch design helps resist breakage during eject
• High temperature insulators suitable for ead freeprocessing and meet JEDEC J-STD-020C
• Robust system solution when used with 3MIDC Wiremount Sockets or 3MMolded Cable Assemblies

• Low profile, light weight, and small size
• Compatibility with both SD card and multimedia card formats
• Smooth push-push eject mechanism
• Write protect switch indicator
• Card polarization
• Card detection indicator
• Metal-shielded cover
• Meets SD Card Association standards for known compatibility and reliability
• Connector has a 10,000 cycle reliability
• Connector has an internal mechanical restraint providing added card retention
• RoHS* compliant

3M has introduced a new connector for microSD™ cards that has a 1.85 mm profile height, one of the lowest in the industry.

• 1.85 mm low profile height
• Small size of 14.0 mm 14.2 mm footprint
• Smooth pushush eject mechanism
• Card is retained when mated
• Card polarization
• Will accept a card thickness of 0.8 mm
• Mechanism prevents card from flying out upon ejection
• Card detection indicator
• Metalhielded cover
• microSD™ specification compliant

3M Introduces Serial Advanced Technology Attachment (SATA), the next generation of serialized data transmission for data storage applications (hard disk drives).

• 7-position Signal Plug
• 22-position Combo Signal and Power Connectors
• 1 meter Assembly Transmission Length
• Created for Hard Disk Drive (HDD) Storage Interface
• Up to 300 MB/sec (3.0 Gbs) Data Transfer Rates
• EMLB for Hot Swap Requirements
• Backward Compatible with Existing ATA Software
• Polarization and Alignment Guides for Blind Mate Requirements
• Backplane and Mezzanine Card Direct Attach
• 250 mV - Low Voltage Signal
• Serialized, Differential Pair Signal