Skip to Site Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M Roadway Safety

Products
Product_Catalog_GPIM
Services
Safety Initiatives & Funding
Resources
Support
Product Catalog for 3M Traffic Safety Systems > Infrastructure Protection Products > 

Coatings for Flow Lines


[click to enlarge]


Flow lines are surface pipelines carrying oil, gas or water that connects the wellhead to a manifold or to production facilities.3M Scotchkote coatings offers internal and external corrosion protection with a broad range of chemical resistance and service conditions.
Make a Selection

3M™ Scotchkote™ Epoxy Coating 162 HB
3M™ Scotchkote™ Epoxy Coating 162 HB has been specifically developed as a solvent-free lining for the internals of pipes, tanks, vessels and other equipment in contact with fresh water, sea water, oil and effluent. The product can also be used on externals of pipes where an abrasion-resistant system is required. Mixed 2 parts base to 1 part activator.

3M™ Scotchkote™ Epoxy Coating 162 PWX
3M™ Scotchkote™ Epoxy Coating 162 PWX has been specifically developed as a solvent-free lining for the internals of pipes, tanks, vessels and other equipment in contact with potable water. Mixed 2 parts base to 1 part activator.

3M™ Scotchkote™ Epoxy Coating EA4 2217
3M™ Scotchkote™ Epoxy Coating EA4 2217 has been specifically developed as an internal lining for pipelines carrying aviation fuel and other refined petroleum products where excellent chemical protection is needed. Mixed 4 parts base to 1 part activator.

3M™ Scotchkote™ Epoxy Coating KSIR88
3M™ Scotchkote™ Epoxy Coating KSIR88 has been specifically developed as a high performance internal lining for pipelines and tanks to provide enhanced corrosion and chemical resistance, and to minimize solvent emissions during application. Mixed 3.5 parts base to 1 part activator.

3M™ Scotchkote™ Fusion Bonded Epoxy Coating 135
3M™ Scotchkote™ 135 Fusion Bonded Epoxy Coating (FBEC) is a one part, heat curable, thermosetting epoxy coating designed for corrosion protection of metal.

3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 134
3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 134 (FBEC) is a one part, heat curable, thermosetting epoxy coating designed for corrosion protection of metal.

3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 226N+
3M™ Scotchkote™ Fusion-Bond Epoxy Coating 226N+ is a one-part, heat curable, thermosetting epoxy coating powder designed for corrosion protection of pipe. The 226N+ also provides excellent damage resistance while handling.

3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 6233
3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 6233 is a one-part, heat curable, thermosetting epoxy coating powder designed for corrosion protection of pipe. The coating exceeds all industry pipe-coating standards. 3M Scotchkote Fusion-Bonded Epoxy Coating 6233 is available in 65 and 2205 lbs.

3M™ Scotchkote™ Fusion-Bonded Epoxy Coating XC-6171
3M™ Scotchkote™ Fusion-Bonded Epoxy Coating XC-6171 is a one-part, heat curable, thermosetting, powdered epoxy coating designed for coating the interior of production tubing, line pipe, and fittings. When applied over a primer, XC-6171 FBEC meets Saudi Aramco seawater and sour gas service requirements.

3M™ Scotchkote™ Liquid Phenolic Primer 345
3M™ Scotchkote™ Liquid Phenolic Primer 345 is a one-part phenolic base primer designed specifically for application to metal surfaces prior to topcoating with Scotchkote Fusion Bonded Epoxy Coating. When properly applied, Scotchkote 345 primer and topcoat system provide excellent resistance to CO2, H2S, CH4, petroleum distillates and brine at elevated temperatures and pressures.

3M™ Scotchkote™ Urethane Coating 165 HB
3M™ Scotchkote™ Urethane Coating 165 HB has been specifically developed as a 100% Solids lining with a degree of flexibility for the internals of pipes, tanks, vessels and other equipment in contact with fresh water, sea water and effluent. Mixed 4 parts base to 1 part activator.

3M™ Scotchkote™ Water-based Primer 500N
3M™ Scotchkote™ Water-based Primer 500N is a water-based metal treatment designed to increase adhesion of fusion bonded epoxy coatings. Properly applied to blast-cleaned steel, it provides protection for metal surfaces and a uniform bonding base for increased coating performance.

Business Login

Login to Infodirect

Document Library

Looking for product details? View and download brochures and technical documents.

Help Us Help You


Please provide feedback often — each visit if possible.

Fast Feedback
Were you able to complete your task on this visit to the Traffic Safety portion of 3M.com?
Yes
No
 

- Or -