Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ FireDam™ Spray 200

3M™ FireDam Spray 200 is a sprayable water-based material, that dries to form a tough, elastomeric coating. This material when used as part of an assembly will firestop building joints, perimeter joints (curtain wall), and through penetration seals.

When installed properly 3M™ FireDam Spray 200 will control the transmission of fire, heat and smoke before, during and after exposure to fire.

3M™ FireDam™ Spray 200 can be applied with conventional airless sprayers.

3M™ FireDam™ Spray 200

Ideal for sealing building joints, penetration seals and perimeter joints between fire-rated floors (concrete, fire-proofed fluted steel decks) and fire-rated walls (gypsum, concrete). Applied as 1/8 inch (3mm) thick coating with an airless sprayer, this water-based coating dries in ambient conditions to form a flexible seal with compression/extension of up to +/- 50% of nominal joint width.

  • Dries quickly to dark gray or red
  • Consistent spray patterns
  • STC rating 56 when installed in a 56 STC rated wall assembly
  • Sag resistant for vertical applications
  • Applied with conventional airless sprayers
  • High elasticity/movement capability

View 3M™ FireDam™ Spray 200 Data Sheet

View 3M™ FireDam™ Spray 200 Brochure


Contact 3M Fire Protection Products

For questions or help finding the right solution, contact an expert at 1-800-328-1687 option 7.

Contact Fire Protection Products