Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ FireDam™ Spray 200

Red, 5 gallon, Pail, 1/case

3M(TM) FireDam(TM) Spray 200, Red - JPG 
Product Color(s):RedRed
3M ID 98-0400-5588-5
GTIN(UPC/EAN) 0  00  51115  18798  8 
left right

Product Information:

Sprayable water-based material, that dries to form a durable, elastomeric firestop coating. This material, when used as part of an assembly, will firestop building joints, perimeter joints (curtain wall), and through penetration seals. Provides up to 4-hour fire protection in construction joints. Red spray (also available in gray), ± 50% movement capabilities.

Additional Information
This firestop spray helps prevent the spread of fire, smoke and noxious gas. In addition, this product acts as an acoustic barrier by minimizing noise transfer (STC-Rating of 56 when tested in a STC 56-rated wall assembly) and meets the intent of LEED® VOC environmental guidelines. Note: when tested at 50% movement for 100 cycles in a 4-inch joint, product remained elastomeric and did not show signs of cracking.

The coating complies with the current requirements of the International Building Code (IBC), NFPA 5000 and NFPA 101. It has been fire tested and evaluated for use in construction joints under the pass/fail criteria of ASTM E 1966 (UL 2079), for Perimeter Joints under the pass/fail criteria of ASTM E 2307 and for Through Penetrations under the pass/fail criteria of ASTM E 814 (UL 1479) Standard.

Product Document Downloads:

PDF 3M™ FireDam ™ Spray 200- Red - MSDS (United States)
PDF 3M™ FireDam™ Spray 200 Product Data Sheet - Data Sheet (PDF 301.2 K)

Key Features:

  • Up to 4-hour fire protection in construction joints and up to 2-hour fire protection for through penetration systems
  • Highly elastic material maintains performance with up to ± 50% movement capabilities
  • Superior adhesion to most construction materials
  • Broad range of applications (extensive portfolio of tested and listed construction and perimeter joint systems)
  • Improved spraying pattern - applied with conventional airless spray equipment
  • Paintable
  • Robust jobsite formula (freeze/thaw resistant and uniform seal formation in hot or cold drying conditions)
  • Improved spraying for lower sag, uniform coating build properties (stays where it’s sprayed)
  • Improved hiding power to maintain proper coating thickness
  • Easy water clean up

  • Typical Applications:

    Ideal for firestopping construction joints, perimeter joints, and through penetrations.
     

    Contact 3M Fire Protection Products

    For questions or help finding the right solution, contact an expert at 1-800-328-1687 option 7.

    Contact Fire Protection Products