Firestop foam used to fill the annular space created by pipes and cables penetrating through fire-rated construction.
Firestop foam used to fill the annular space created by pipes and cables penetrating through fire-rated construction. FIP 1-Step foams in place filling the void between the through penetrant (pipe, cable etc) and the wall creating a firestop seal restoring the fire rating of the entire wall.
Firestop tested up to 2 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
Meets the International Building Code for Passive Fire Protection
Expands up to 5X when dispensed. One cartridge FIP 1-Step equals up to 6 tubes 10.1 oz caulk
Intumescent. Expands in a fire
Expansive UL systems for blank openings, metal pipe, cables, cable trays, combos, insulated pipe
UL systems require no mineral wool
Remains pliable after installation for easy installation of new cables/conduit in existing opening
Excellent adhesion. Can be installed in wall or floor applications with no backing material
Quick cure. Full expansion after approximately 2 minutes
Paintable with primer
STC rating of 57 when tested in STC 57 rated wall assembly
Air leakage less than 1 CFM/Sq Ft
Meets the intent of LEED VOC regulations. <250 g/L VOC contents (less H2O and exempt solvents)
Ideal for sealing single or multiple through penetrations in fire-rated construction. Typically used in mechanical, electrical, data and plumbing applications to firestop metallic pipe, conduit, cables, cable trays, busways, combos, insulated pipe and HVAC ducts passing through fire-rated floors and walls. Also used to firestop blank openings in floors and walls.