Skip to Primary Navigation Skip to Site Navigation Skip to Main Content

3M™ Fire Barrier Moldable Putty Pads MPP+

9.5 in x 9.5 in, 20/case

3M(TM) Fire Barrier Moldable Putty Pad large 
Product Color(s):RedRed
3M ID 98-0400-5526-5
GTIN(UPC/EAN) 0  00  51115  16510  8 

Product Information:

A one-part, ready-to-use, re-enterable, intumescent putty that can be easily formed to firestop metallic and non-metallic electrical boxes in, wall-openings and through penetrations in fire-rated assemblies.

Additional Information
Provides up to 4-hours of fire protection. 9-1/2 inch x 9-1/2 inch dark red moldable pad (241.2 mm x 241.2 mm). Protective and moldable putty that helps prevent the spread of fire, smoke and noxious gas. Acts as a draft and cold smoke seal for systems with L-Ratings. In addition to its fire-resistant properties, this material has airborne sound reduction characteristics which helps minimize sound transmission through assemblies requiring an STC rating.

Meets the requirements of key life safety codes, including the International Building Code (IBC), NFPA 5000, NEC (NFPA 70), NFPA 101 and NBC (Canada) Building Codes. Meets the intent of LEED® VOC guidelines.

Product Document Downloads:

PDF 3M Fire Barrier Moldable Putty + Pads - MSDS (United States)
PDF 3M™Fire Barrier Moldable Putty Pads MPP+ Product Data Sheet - Data Sheet (PDF 267.5 K)
PDF Fire Barrier Moldable Putty + Metal & Non Metal Elec Boxes - Data Sheet (PDF 231.1 K)
View additional product-related literature

Key Features:

  • Firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479) &CAN/ULC S115
  • Wall opening protective material tested up to 2 hours in accordance with UL 263
  • Provides draft and cold smoke seal
  • Helps reduce noise transfer (STC-Rating of 56 when tested in STC 56-rated wall assembly)
  • Halogen-free formula
  • Pliable and conformable (molds easily into required shapes)
  • Self-adhering pads can be joined together for larger firestop applications
  • Noncorrosive to metal and compatible with synthetic cable jackets
  • Will not dry out or crumble, re-enterable

  • Typical Applications:

    Typically used for wall opening protection of membrane penetrations by metallic and non-metallic electrical outlet boxes to meet building code requirements. It is also used to seal gaps between cables in multiple penetrations (including fiber optic inner duct) and to firestop cable bundles, insulated pipe, electrical conduit, metal pipe and other through penetrations.
     

    Contact 3M Fire Protection Products

    For questions or help finding the right solution, contact an expert at 1-800-328-1687 option 7.

    Contact Fire Protection Products