3M™ Fire Block Sealant FB 136, a one component, water-based, non-combustible draft, smoke and fireblocking sealant, designed to resist high temperatures and smoke passage in non-rated construction.
Additional Information
3M™ Fire Block Sealant FB 136 meets ASTM E-136, current 2003 International Building Code (IBC), 2003 International Residential Code (IRC), 2003 International Residential Mechanical Code, 2003 International Fuel Gas Code and NFPA 5000 draft, smoke and fireblocking requirements.
3M™ Fire Block Sealant FB 136 features superior adhesive strength, caulk rate, and no-sag application, plus a halogen-free formula.
3M™ Fire Block Sealant FB 136 can be installed with a standard caulking gun, pneumatic pumping equipment, or it can be easily applied with a putty knife or trowel. 3M™ Fire Block Sealant FB 136 will bond to concrete, brick, metals, wood, plastic, and cable jacketing. No mixing is required.
3M™ Fire Block Sealant FB 136 Features:
· Easy clean up with water · No special handling, routine disposal · Thixotropic: Will not sag or run in vertical or overhead applications · Halogen-free · Tack free in approximately 15 minutes · Gray color · High caulk rate
Applications: Use 3M™ Fire Block Sealant FB 136 to seal interior construction voids around wires, pipes, HVAC ducts and vents, in wood or steel framed non-rated construction. May also be used around chimney, fireplace and other framing gaps. Not for exterior use.
Thixotropic (will not sag or run in vertical or overhead applications)
Halogen-free
Tack-free in approximately 15 minutes
Applied with standard caulking gun or trowel (high caulk rate)
Typical Applications:
Typical applications include: sealing interior construction voids around wires, pipes, HVAC ducts and vents, in wood or steel framed non-rated construction. May also be used around chimney, fireplace and other framing gaps. Not for exterior use.
Gray
