Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M Custom Formed Reflectors

Customer
Fill in up to 3 volume levels for quote *
3M Reflector Product *
Key Reflector Dimensions (Refer to Design guide for definitions)
General Part Shape *
  • General Circular
  • (Please enter dimension within the suggested range of values for the automated quote system to work properly. If the reflector has dimensions outside the accepted range the quote will need to be evaluated manually for feasibility.)
  • Measurement Unit:    
  • [0.2 - 2]inches
  • [0.5 - 4]inches
  • [0.5 - 8]inches
  • [4 - 45]inches
  • [1.25 - 3]inches
  • Conical Frostrum
  • (Please enter dimension within the suggested range of values for the automated quote system to work properly. If the reflector has dimensions outside the accepted range the quote will need to be evaluated manually for feasibility.)
  • Measurement Unit:    
  • [0.2 - 2]inches
  • [0.5 - 4]inches
  • [0.5 - 8]inches
  • [0.5 - 9]inches
  • Rectangular Generic
  • (Please enter dimension within the suggested range of values for the automated quote system to work properly. If the reflector has dimensions outside the accepted range the quote will need to be evaluated manually for feasibility.)
  • Measurement Unit:    
  • [0.2 - 2]inches
  • [0.5 - 4]inches
  • [0.5 - 9]inches
  • [0.5 - 8]inches
  • [1 - 10]inches
  • [1 - 9]inches
  • [4 - 45]inches
  • [1.25 - 3]inches
  • Trapezoid Cube
  • (Please enter dimension within the suggested range of values for the automated quote system to work properly. If the reflector has dimensions outside the accepted range the quote will need to be evaluated manually for feasibility.)
  • Measurement Unit:    
  • [0.2 - 2]inches
  • [0.5 - 4]inches
  • [0.5 - 9]inches
  • [0.5 - 10]inches
  • [0.5 - 8]inches
  • [0.5 - 9]inches
  • The automated quoted system will not generate a quote for other shapes. Manual quoting will be required. Please submit the request information and any customer drawings. Please allow 7 days for a quote to be completed.
  • Measurement Unit:    
  • inches
  • inches
  • inches
  • inches
  • inches
Part Trimming (Edges, LED cutouts etc) *

The information you provide on this Request a Quote form will be used to respond to your request and as further described in our Internet Privacy Policy. Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Request a Quote form.