Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Scotchkote™ Pipe Renewal Liner 2400

Spin Cast Application Spray Head
Spin Cast Application Spray Head
Scotchkote Liner 2400 is applied by 3M Authorized Applicators using certified application equipment for the trenchless rehabilitation of potable water pipelines.
  • NSF/ANSI-61 certified polyurea formulation is 100% solids and contains no epoxy resin
  • Designed to help solve a wide variety of problems common to potable water systems
  • Utilizes a trenchless spin cast application method
  • Lined sections can be returned to service 90 minutes after lining
  • Classified as an AWWA M-28 class IV fully structural lining
  • Scotchkote Liner 2400 is applied exclusively by 3M Authorized Applicators
Contact Us

1-888-745-4350 Call us for technical support, product information, or help with any questions.

Email Us



3M™ Scotchkote™ Pipe Renewal Liner 2400 helps provide a cost effective solution to many of the problems common to potable water distribution systems. Its unique properties, combined with a trenchless spin cast application process, can efficiently coat the existing infrastructure—restoring internal pipe diameters, increasing flow, improving efficiency, minimizing water loss and helping to prevent additional corrosion and build up of scale and tuberculation. At prescribed lining thickness (caliper) and bury depths, Scotchkote Liner 2400 is projected to meet the material properties of ASTM F1216-09 after 50 years (3M used the following test methods to validate: ASTM D638-08, ASTM D790-07, ASTM D2990-08, and ASTM D1599-99). Scotchkote Liner 2400 offers a 10 minute set time and 60 minute cure followed by a 30 minute flush. The ability to reinstate a water main within 90 minutes of lining allows for same day return to service—reducing total cost, shortening construction schedules and minimizing disruptions to water customers, traffic and local businesses.
  • Rehabilitation of ductile, cast-iron or cement mortar lined ductile or cast iron drinking water mains between 4" (100mm) and 24" (610mm) in diameter.


Application Thickness1.2 to 8mm dependent upon requirements, pipe diameter and bury depth - consult 3M Design and Installation Guide
Container Volume (metric)12 Litre
Drinking Water ApprovalsNSF/ANSI 61, Reg 31(4)a
Full Cure Time Temperature Time60 second gel, 10 minute cure (CCTV), 60 minute total cure, 30 minute flush
Industry SolutionsRehabilitating Potable Water Infrastructure
Mixed ColorGrey
Mix Ratio1:1 (Part A:Part B)
Product FamilyScotchkote Liner 2400
Product TypePolyurea
Recommended ApplicationPipes
Recommended SurfacesCement Mortar Lined Ductile Iron, Ductile Iron, Cast Iron, Cement Mortar Lined Cast Iron
Shelf Life1 Year
Storage TemperatureStore between 5C (40F) and 32C (90F)
Used WithPotable Water (select countries and uses)