Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 206N

Scotchkote Fusion Bonded Epoxy 206N Fluid Bed Grade
Scotchkote Fusion Bonded Epoxy 206N Fluid Bed Grade

Scotchkote FBE Coating 206N is a one-part, heat curable, thermosetting epoxy coating designed for corrosion protection of metal. It can be custom applied to protect pipelines (external and internal) and a variety of infrastructure components from corrosion.

  • Resistant to corrosive soils, hydrocarbons, harsh chemicals and sea water.
  • Meets the requirements of AWWA Standard C213 and C550
  • Fast curing for high application productivity
Contact Us

1-888-745-4350 Call us for technical support, product information, or help with any questions.

Email Us



3M™ Scotchkote™ fusion-bonded epoxy (FBE) coatings are widely available for protecting pipelines (external and internal) and reinforcing steel water and wastewater infrastructure from corrosion. Typically applied by either manual flocking (air spray), electrostatic spray, fluid bed dip, 3M™ Scotchkote™ FBE coatings can also be custom applied to a variety of infrastructure components, including valves, pumps, tapping saddles, pipe appurtenances, manifolds, sewage aerators, tanks, pipe hangars, ladders, hydrants, cast iron risers and flow meters.

Scotchkote FBE Coating 206N is available in four different formulations to provide the excellent coverage in various processes:  Standard, Long Gel and Extra Long Gel format provide product gel and flow characteristics to produce a smooth, continuous coating with high edge coverage; the Fluid Bed Grade (FBG) format enables even dispersion of product and optimum fluidization in the largest of fluid beds.

  • Suitable for use on pipe, fittings, valves, couplers, pumps and other equipment.


Application ThicknessApplication dependent. For NSF certified applications, max approved thickness is 1.5mm (60 mil)
Container Volume2205 Gallon, 65 lb.
Coverage Area0.694 sq meter per kg per mm (134 sq feet per pound per mil)
Drinking Water ApprovalsNSF/ANSI 61 (Pipes, Fittings, Pumps, & Valves Only), WRAS
Full Cure Time Temperature Time90-115 second gel, 18 minute cure at 193°C (380°F), 30-45 second gel, 6 minute cure at 217°C (423°F), 37 second gel, 6 minute cure at 218°C (425°F)
Industry SolutionsValve, Pump, Ancillary Equipment Protection, Storing Water, Protecting Potable Water Infrastructure
Mixed ColorBlue-Green
Product FamilyScotchkote FBE Coating 206N FBG, Scotchkote FBE Coating 206N XLG, Scotchkote FBE Coating 206N LG
Product TypeFusion-Bonded Epoxy
Recommended ApplicationPipes, Manifolds, Hydrants, Tanks, Vessels, Pumps, Flow Meters, Valves, Ancillary Equipment
Recommended SurfacesSteel
Shelf Life1
Storage Temperature0 to 27 Degree Celsius
Used WithPotable Water (select countries and uses)