Perfomance
- Input Method: Finger input
- Accuracy*: Reported touch coordinates are within 1.0% of true position (based on viewing area dimensions) when linearized and used with a MicroTouch™ EX II Series touch controller
- Touch System Resolution: Touch screen resolution defaults to settings in the electronics and software, generally 1024 x 1024, but capable of 16K x16K when used with EX II.
- Linearization: Factory-linearized values are stored in the attached controller.
- Impact Resistance: Passes the UL-60950-1
Optics
- Light Transmission**: 86.5 % (±1.5%) light transmission (tested on the BYK Gardner Haze Gard Plus)
- Surface Finish: ClearTek™ II hard coat with optimal anti-glare properties. Scratch resistant top coat provides smooth, easy glide, easy to clean touch surface
Mechanical
- Minimum Contact Requirement: 5.4 ms for finger input with an EX II Series controller
- Glass Thickness: 7.57mm (±0.58mm), with 3M Vikuiti™ Light Control Film (privacy): 8.51mm (±0.58mm)
- Display Size Supported: Standard products ranging from 10.4" to 19" diagonal (Light Control Film: 10.4" to 17" diagonal). Custom products available ranging from 6.5" to 32".
- Surface Scratch Hardness: A Mohs pick with a hardness rating of 7 or higher is required to induce a scratch which will cause a functional failure. Exceeds severe abrasion test per MIL-STD-675C
- Sealing Rating: Can be sealed to meet the IP 66 or NEMA 4 standard for resistance to infiltration of fluids into the enclosure.
- Gasketing: Complete water-resistant seal obtainable with a polyethylene gasket. Please consult the ToughTouch II Integration Guide for further details.
- Mounting: Please consult ToughTouch II Integration Guide for specific mounting instructions.
- Cleaning: Water, isopropyl alcohol, or similar non-abrasive cleaners.
Reliability
- Surface Obstructions: The touch screen continues to operate with surface contaminants such as, dirt, dust and grease.
- Chemical Resistance: ClearTek™ II is highly resistant to corrosives, in accordance with ASTM-D-1308-07 (1993) and ASTM - F- 1598-95.
- Liquid Resistance: Liquids on screen do not impede touch screen performance.
- Operating Temperature*: -40° C to 70° C for the touch screen.
- Storage Temperature: Always store the touch screen in its original shipping container between -50° C and 85° C (up to 90% RH from 0° C to + 35° C). Never store the touch screen in an environment where condensation may form.
- Humidity: Up to 90% RH from 0° C to +35° C, non-condensing.
- RoHS Compliance: ToughTouch II is compliant with the European Union 2002/95/EC Directive on Restriction of Hazardous Substances (RoHS).
- Warranty: 5 years
* Achievement of the listed specifications has been demonstrated in monitor integrations where the touch screen is mounted to monitor frame such that the spacing between the touch screen and monitor screen does not vary due to compression on expansion from touch forces or temperature changes.
** Test uses BYK Gardner Haze Gard Plus.
