3M Fiber Dome Closure FDC 10S Enables Tool-less Installation and Re-Entry
|
Image Downloads
|
|
3M™ Fiber Dome Closure FDC 10S (TIFF 25 MB)
You may download a high-resolution copies of these images for promotion and editorial purposes. The images are available as a 300-dpi TIFF. To download, right-click to start the download process and save the file (Save Target As...) to your hard drive.
|
AUSTIN, Texas – February 26, 2009 - The Fiber Dome Closure FDC 10S from 3M Communication Markets Division gives service providers a new solution for protecting the fiber splice joints over long haul, metro, local access and fiber-to-the-premise feeder and distribution networks.
The new FDC 10S from 3M utilizes the company's core strength of environmental and mechanical protection products with more than 40 years in the telecommunications industry.
Hermetically sealed for aerial, pedestal, or below-grade applications, the new Fiber Dome Closure FDC 10S from 3M is designed for butt splice applications using either single or ribbon fiber cable. The fixed O-ring sealing system, along with an innovative latching mechanism of the FDC 10S, that requires no special tools, means quick installation that does not compromise environmental or mechanical protection.
Additional features include:
- spacious slack storage area for routing, protecting, and “expressing” buffer tubes or ribbon fibers.
- adjustable and removable tray support bracket for easier installation of cables after the initial install.
- hinged splice trays for access to any splice without distributing other trays.
The FDC 10S is equipped with one oval port for express or mid-span cable applications and five round branch cable ports. The oval main cable port accommodates two 27 mm (1.06 inches) diameter cables and each of the round cable ports accommodate one 18 mm (0.71 inch) diameter all-dielectric or armored cable. The splice capacity of the FDC 10S is 288 single fiber or 432 mass fusion splices.
Like the recently released Fiber Dome Closure FDC 08S from 3M, the FDC 10S fiber dome closure utilizes the external cable assembly module (ECAM) built-in cable entry port system. The ECAM design allows true plug-and-play capability which can reduce installation and labor costs because the cable preparation and installation are completed outside of the closure body. The built-in cable entry system allows the technician to add and remove cables from the closure without breaking the cable seals.
Contact the 3M Communication Markets Division at (800) 426-8688 or www.3m.com/telecommunications for a list of distributors.
About 3M Communication Markets Division
With more than 40 years in the telecommunications industry, 3M Communication Markets Division offers one of the widest and most comprehensive suite of scalable solutions to communications service providers around the world, from underground and buried plant, to central office, premises and more. Proven systems from 3M optimize network testing, construction, locating and maintenance for faster, more reliable high-bandwidth transmissions; enable physical media-layer capabilities for FTTP and DSL deployments from central office to customer premises; and deliver fiber optics technologies to leverage existing infrastructure or install completely new networks.
About 3M
A recognized leader in research and development, 3M produces thousands of innovative products for dozens of diverse markets. 3M’s core strength is applying its more than 40 distinct technology platforms – often in combination – to a wide array of customer needs. With $24 billion in sales, 3M employs 75,000 people worldwide and has operations in more than 60 countries. For more information, visit www.3M.com.
Contact:
Jane Kovacs, 3M Public Relations
Phone: (512) 984-6747
jkovacs@mmm.com
← Back
