Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Scotch-Brite™ EXL Deburring Wheel, 8 in x 1 in x 3 in 9S FIN, 3 per case

3M ID  61500126810    UPC#  00048011051352    3M Product Number  05135     
Scotch-Brite(TM) EXL Deburring Wheel, 3 in Center Hole Dia
Scotch-Brite(TM) EXL Deburring Wheel, 3 in Center Hole Dia
Scotch-Brite™ EXL, EX2 and EX3 Deburring Wheels
Scotch-Brite™ EXL Deburring Wheel features a hard, dense consistency that quickly deburrs, finishes, and polishes all types of metals, composites, glass and leaves a smooth, clean surface. Its conformable characteristic makes the wheel ideal for deburring stamped or laser cut parts, or for finishing after belt sanding.
  • Solid, dense, and conformable wheel produces a professional finish the first time, without undercutting, gouging, or distorting the workpiece
  • Effective for all types of metals, composites, and glass, allowing one wheel to perform more tasks
  • Convolute construction keeps the wheel running smooth, producing a consistent, superior finish
  • Unique resin system minimizes smearing, reducing time spent cleaning surfaces
  • Minimizes heat build up to reduce risk of discoloration and warping on heat-sensitive substrates
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    The finished result is a clean surface without smearing, reducing the need for additional clean up and preparation. Convolute construction and clean, uniform wear keep the wheel running smoothly and help the operator attain a professional finish while minimizing fatigue. Our Scotch-Brite material runs cool and provides the EXL Deburring Wheel with uniform wear and keeps fresh abrasives continuously exposed, making it a superior choice on heat sensitive substrates. The toughness of the wheel extends its service life. Scotch-Brite™ EXL Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Scotch-Brite™ is a unique surface conditioning product with abrasives incorporated into non-woven nylon fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibers.

    Specifications

    ApplicationBlending, Deburring, Deburring Edges, Finishing, Flat Finishing, Polishing
    Application CategoryBlending/Deburring, Finishing/Polishing
    BrandScotch-Brite™
    Center Hole Diameter3 Inch
    ColorGray
    Converted FormWheel
    Density9
    Diameter8 Inch
    Diameter (metric)203.2 Millimetre
    Equipment - MachinesBackstand, Bench Motors
    Form TypeConvolute/Deburring
    GradeFIN
    Industry - UseMarine, Metalworking
    Max RPM4500
    Mineral TypeSilicon Carbide
    PositionGood
    Primary ApplicationMetalworking
    Product FormWheel
    Sub IndustryBuilders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
    SubstrateAll Metals, Glass, Hard Composite, Soft Composite
    Width1 Inch
    Width (metric)25.4 Millimetre