Industrial Adhesives & Tapes

Narrow By

Categories

• Non-Structural Adhesives (6)
• Packaging Tapes & Equipment (4)
• Protective Films & Tapes (19)
• Single-Sided Tapes (45)
• Structural Adhesives (11)

Adhesive Type

• Hot Melt Synthetic Rubber Resin (3)
• Rubber (59)
• Silicone (5)

Application

• Hard Disk Drive Component Assembly (5)
• Masking Body Jig Barcode (2)
• Masonry & Plaster Finishes (5)
• Protect From Paint Overspray in Painting (2)
• Wrapping Rollers to provide traction (5)
• more...

Brand

• 3M (40)
• Scotch (28)
• Scotch-Weld (17)

Container Volume

• 11 Pound (4)
• 200 Millilitre (2)
• 22 Pound (2)
• 5 Gallon (US) (4)
• 50 Millilitre (2)
• more...

Industry - Use

• General Industrial (61)
• Metalworking (64)
• Military & Government (74)
• Specialty Vehicle (69)
• Transportation (74)
• more...

Primary Advantage

• Low Noise (1)

Product Category

• Masking and Duct Tapes (38)
• Non-Structural Adhesives (6)
• Protective Coatings, Films & Tapes (19)
• Specialty Tapes (26)
• Structural Adhesives (11)
• more...

Size

• AE (2)
• PG (2)
• Q (2)

Adhesion to Steel oz/in (N/100 mm)

• 22 (24) (19)
• 25 (27) (5)
• 26 (29) (5)
• 34 (37) (5)
• 41 (44) (9)
• more...

Application Method

• It is dispensed with 3M™ Scotch-Weld™ Hot Melt Applicator AE II (2)
• It is dispensed with 3M™ Scotch-Weld™ Hot Melt Applicator LT Q and EC (1)
• It is dispensed with 3M™ Scotch-Weld™ Hot Melt Applicator PG II (2)
• It is dispensed with 3M™ Scotch-Weld™ Hot Melt Applicator TC Q and EC (1)

Backing Material

• Crepe Paper (37)
• Fiberglass reinforced silicone (5)
• Flat paper stock (19)
• Polypropylene Film (3)
• Rubber (2)
• more...

Backing Thickness

• 15 Milli-inch (mil) (19)
• 8 Milli-inch (mil) (5)

Chemical Base

• Acrylic (6)
• Epoxy (5)
• Etylene Vinyl Acetate (6)

Core Size

• 3 Inch (3)

Diameter

• 5.09005 (5)
• 5.20228 (5)
• 5.28098 (9)
• 5.60928 (5)
• 7.51604 (19)
• more...

Elongation

• 10 Percent (6)
• 10.5 Percent (5)
• 4 Percent (20)
• 7 Percent (5)
• 8 Percent (23)
• more...

Flammability Rating--USA

• UL94 HB (3)

Hardness

• 65-70 Shore D (1)
• 80-85 Shore D (3)

Length

• 10 Linear Yard (2)
• 36 Linear Yard (4)
• 60 Linear Yard (20)
• 60.14 Linear Yard (36)
• 8 Inch (2)
• more...

Liner Type

• Easy Release Film (2)

Maximum Operating Temperature (Celsius)

• 121 Degree Celsius (18)
• 149 Degree Celsius (2)
• 163 Degree Celsius (3)
• 66 Degree Celsius (5)
• 93 Degree Celsius (10)

Maximum Operating Temperature (Fahrenheit)

• 150 Degree Fahrenheit (5)
• 200 Degree Fahrenheit (10)
• 250 Degree Fahrenheit (18)
• 300 Degree Fahrenheit (7)
• 325 Degree Fahrenheit (3)

Meets Specifications

• ASTM D 6123 (28)
• D 6123M-97 (28)
• UL 94 Listing V2 (4)

Peel Strength at 72 Degrees F (22 Degrees C)

• 25 Pound Per Inch (Of Width) (2)
• 30 Pound Per Inch (Of Width) (6)
• 4 Pound Per Inch (Of Width) (3)

Product Form

• Each (7)
• Gallon (4)
• Kit (1)
• Pound (6)
• Roll (67)

Shear Strength at 72 Degrees F (22 Degrees C)

• 2000 Pound-Force Per Square Inch (3)
• 2500 Pound-Force Per Square Inch (2)
• 3600 Pound-Force Per Square Inch (6)

Shelf Life

• 12 Month (65)
• 18 Month (5)
• 24 Month (5)

Solids Weight Percent (Approximate)

• 100 Percent (6)

Storage Temperature

• 72 Degree Fahrenheit (5)
• <=40 Degree Fahrenheit (6)

Tape Grade

• Economy (1)
• Premium (2)

Tensile Strength lb/in (N/100 mm)

• 19 (333) (5)
• 20 (350) (5)
• 22 (385) (7)
• 27 (472) (14)
• 28 (490) (24)
• more...

Thickness

• 16.7 Milli-inch (mil) (19)
• 4.4 Milli-inch (mil) (5)
• 6 Milli-inch (mil) (5)
• 6.3 Milli-inch (mil) (9)
• 7.6 Milli-inch (mil) (5)
• more...

Time to Handling Strength

• 10 Hour (2)
• 10 Minute (6)
• 8 Hour (3)

Total Thickness

• 45 Milli-inch (mil) (2)
• 9.3 Milli-inch (mil) (5)

Width

• 0.70 Inch (6)
• 0.94 Inch (9)
• 1.41 Inch (6)
• 1.88 Inch (9)
• 2.83 Inch (6)
• more...

Worklife

• 10 minutes @ 72 F (22 C) (6)
• 120 minutes @ 72 F (22 C) (2)
• 60 minutes @ 72 F (22 C) (3)

Material

• Plastic (1)