Electronics & Electrical Supplies

Narrow By

Categories

• Electrical Wire Connectors and Tools (9)
• Heat Shrink (7)

Brand

• 3M (2)

Conductor Sizes

• 12 - 6 AWG (2)
• 2 - 4/0 AWG (2)
• 8 - 1/0 AWG (2)

Industry - Use

• Automotive (1)
• Electronics (1)
• General Industrial (2)
• MRO (1)
• Transportation (1)
• more...

Product Category

• Adhesive Transfer Tapes & Double Coated Tapes (2)

Splice Configuration

• Heat Shrink Heavy-Wall Cable Sleeve (ITCSN) (6)

Splice Type

• Heat Shrink (6)

Voltage

• 1 kV (6)

Adhesion to Foam

• 3 (1)
• 4 (1)

Adhesion to HSE

• 5 (1)
• 9 (1)

Adhesion to LSE

• 1 (1)
• 5 (1)

Adhesion to Metal

• 10 (1)
• 5 (1)

Adhesive Peel Initial

• 4 (1)

Adhesive Peel Ultimate

• 5 (1)

Applicable SAE-AMS-DTL-23053 Specifications

• 20353/15 class 1 (2)
• 23053/15 class 2 (5)

Chemical Resistance

• 5 (1)
• 9 (1)

China RoHS - Below MCV

• Yes (12)

Controller

• Serial (2)
• USB (2)

Dielectric Strength

• 500 Volt (7)
• 900 Volt (1)

Display Type

• LCD (4)

Elongation

• 400 Percent (2)
• 475 Percent (6)

Expanded Inner Diameter

• 0.4 Inch (2)
• 0.8 Inch (2)
• 1.1 Inch (2)
• 1.5 Inch (1)
• 1/8 Inch (1)

Face-Side Adhesive Thickness (mils)

• 5 Milli-inch (mil) (1)

Face-Side Adhesive Type

• 200MP High Performance Acrylic (1)
• 400 High Tack Acrylic (1)

Flammability Rating

• Non- Flame Retardant (6)
• Self-Extinguishing (1)
• UL 224 All Tubing Flame Test (1)

Heat Shrink or Cold Shrink

• Heat Shrink (1)

Humidity Resistance

• 8 (1)
• High (1)

Length

• 48 Inch (2)
• 6 Inch (4)
• 60 Linear Yard (2)
• 66 Linear Foot (2)
• 9 Inch (2)

Master Size Length

• 180 Linear Yard (2)

Master Size Width

• 48 Inch (2)

Meets Specifications

• UL/M* (1)

Mil Spec

• AMS-DTL-23053/15, Class 1 (6)
• AMS-DTL-23053/5, Class 1 (1)

Moisture Resistance

• 8 (1)
• High (1)

Nominal Adhesive Thickness (mils)

• 2 Milli-inch (mil) (1)

Non-Corrosive

• Yes (8)

Operating Temperature Range

• 0 to 180 Degree Celsius (2)

Operating Temperature Range (Celsius)

• -55 Degrees C to +110 Degrees C (7)
• -55 Degrees C to +135 Degrees C (1)

Plasticizer Resistance

• Low (2)

Primary Liner

• 58# Polycoated Kraft Paper (1)
• 60# Densified Kraft Paper (1)

Primary Liner Thickness (mils)

• 3.5 Milli-inch (mil) (1)
• 4.2 Milli-inch (mil) (1)

Product Form

• Roll (2)

Recovered Inner Diameter

• 0.15 Inch (2)
• 0.2 Inch (2)
• 0.37 Inch (2)
• 0.5 Inch (1)
• 1/16 Inch (1)

Screen Size (mm)

• 381 (3)
• 431.8 (1)

Shear Strength at 72 Degrees F (22 Degrees C)

• 5 Pound-Force Per Square Inch (1)

Shrink Range (min to max)

• .45 to 1.7 Inch (1)

Shrink Ratio

• 2:1 (1)
• 3:1 (7)

Solvent Resistance

• 5 (1)
• 9 (1)

Tape Color

• Brown (1)
• Orange (1)

Temp Resistance-- Lower (deg F)

• -40 Degree Fahrenheit (1)
• -60 Degree Fahrenheit (1)

Temp Resistance-- Upper (deg F)

• 250 Degree Fahrenheit (1)
• 400 Degree Fahrenheit (1)

Tensile Strength

• 2000 Pound-Force Per Square Inch (1)
• 2400 Pound-Force Per Square Inch (7)

Thickness

• 7 Milli-inch (mil) (2)

Touch Technology

• 3M Surface Capacitive (4)

Tubing Type

• Single-Wall Polyolefin Flexible (1)

UL File Number

• E-102356 (6)
• E-39100 (1)

Width

• 0.75 Inch (2)
• 12 Inch (1)
• 2 Inch (1)

pre-shrink fit over clearance

• 1.50 Inch (1)

Color

• Black (4)
• Clear (2)
• Red (4)

Material

• Flexible Polyolefin (1)
• Heavy Wall Cable Sleeves (6)