Scotchkote Coating 162 HB provides excellent corrosion resistant for both internal and external surfaces. This 100% solids lining can be used to coat pipes, tanks, vessels and other equipment in contact with sea water, raw water and wastewater. Scotchkote Coating 162HB may be used on concrete and cementious surfaces when used with Scotchkote Epoxy Sealer SP 810.
3M™ Scotchkote™ Epoxy Coating 162 HB has been specifically developed as a solvent-free lining for the internals of pipes, tanks, vessels and other equipment in contact with fresh water, sea water, oil and effluent. The product can also be used on externals of pipes where an abrasion-resistant system is required.
Specifications
Application Method
Plural Feed Heated Airless Spray
Container Volume
18 Litre
Coverage Area
2 sq meter per liter (21.5 sq feet per liter) at 500 micron (20 mil) dft
Cure Time & Temperature
Hard dry 16 hours, full cure 7 days at 20°C (68°F)
Drinking Water Approvals
Not approved for potable water applications
Industry Solutions
Protecting Wastewater Assets, Storing Water
Mixed Color
Light Grey, Red Oxide
Mix Ratio
2:1 (Part A:Part B)
Product Family
Scotchkote Coating 162HB
Product Type
Epoxy
Recommended Application
Pipes, Tanks, Vessels
Recommended Surfaces
Concrete (when used with Scotchkote Sealer SP 810), Steel
