Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 Black, 35 mL, 12 per case

3M ID  62277904371    UPC#  00051111921661    3M Product Number  DP8005     
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005
Scotch-Weld DP-8005 Family
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 is a two-part acylic-based adhesive. 10:1 mix ratio, 3 minute work life and handling strength in approximately 3 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).
  • 3 minute work life
  • Structurally bonds polyolefins without surface treatment
  • Medium viscosity
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, gluing, joining, attaching, assembling, encapsulating, potting and sealing.
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and Thermoplastic Elastomers (TPE`s) without special surface preparation.

    Specifications

    ApplicationShroud Attachment
    BrandScotch-Weld
    Chemical BaseAcrylic
    ColorBlack
    Consumer LabelNo
    Container Volume35 Millilitre
    Full Cure8-24 hours @ 72 F (22 C)
    Hardness60 Shore D
    Industry - UseAutomotive, Construction, Consumer Goods, Electronics, General Industrial, Military & Government, Specialty Vehicle, Transportation
    Mix Ratio Volume Base:Accelerator10 : 1
    Peel Strength at 72 Degrees F (22 Degrees C)17 Pound Per Inch (Of Width)
    Physical FormFlowable Liquid
    Product FormEach
    Shear Strength at 72 Degrees F (22 Degrees C)2400 Pound-Force Per Square Inch
    Shelf Life6 Month
    Specific Gravity0.99
    Storage Temperature40 Degree Fahrenheit
    Substrate 1Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Wood & Hardboard
    Substrate 2Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Wood & Hardboard
    Time to Handling Strength3 Hour
    TypeStructural Plastic Adhesive
    Units per Case12
    Viscosity Range (cps) at Room Temperature25,000
    Worklife3 minutes @ 72 F (22 C)