Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear, 50 mL, 12 per case

3M ID  62328714357    UPC#  00021200872037    3M Product Number  DP-105    3M Product Number  DP105     
3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP105 is a very flexible, two-part epoxy adhesive that gives you the strength you need, the clean look you desire and fast results you want to meet your deadlines. This very flexible product is effective for glass to metal bonding and sealing where expansion is a consideration.
  • Very flexible adhesive formula provides strong, permanent bond under movement
  • Provides high peel strength
  • Expands and contracts under changing environmental conditions
  • Dries clear and stays clear for nearly colorless bonding of jewelry and glass
  • Effective adhesive system for bonding, joining, gluing, attaching, assembling, encapsulating, potting, and sealing applications
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    3M™ Scotch-Weld™ Epoxy Adhesive DP105 is low viscosity that allows for easy dispensing. Bonds to a wide variety of materials such as, metals, glass, ceramics, wood and many plastics.

    Specifications

    ApplicationHard Disk Drive Component Assembly
    BrandScotch-Weld
    Chemical BaseEpoxy
    ColorClear
    Consumer LabelNo
    Container Volume50 Millilitre
    Full Cure48 hours @ 72 F (22 C)
    Hardness45 Shore D
    Industry - UseConstruction, Consumer Goods, Electronics, General Industrial, Military & Government, Specialty Vehicle, Transportation
    Mix Ratio Volume Base:Accelerator1 : 1
    Peel Strength at 72 Degrees F (22 Degrees C)35 Pound Per Inch (Of Width)
    Physical FormLiquid
    Product FormEach
    Shear Strength at 72 Degrees F (22 Degrees C)2000 Pound-Force Per Square Inch
    Shelf Life15 Month
    Specific Gravity1.13
    Storage Temperature72 Degree Fahrenheit
    Substrate 1EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rubber (Except EPDM), Wood & Hardboard
    Substrate 2EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rubber (Except EPDM), Wood & Hardboard
    Time to Handling Strength20 Minute
    TypeEpoxy Adhesive
    Units per Case12
    Viscosity Range (cps) at Room Temperature6,500
    Worklife4 minutes @ 72 F (22 C)