Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear, 50 mL, 12 per case

3M ID  62328714357    UPC#  00021200872037    3M Product Number  DP-105    3M Product Number  DP105     
3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP105 is a clear, colorless, fast setting, flexible, two-part epoxy adhesive. 1:1 mix ratio, 3-5 minute work life and handling strength in approximately 20 minutes. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).
  • 4 minute worklife
  • Very flexible
  • High peel strength
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, joining, gluing, attaching, assembling, encapsulating, potting and sealing.
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    3M™ Scotch-Weld™ Epoxy Adhesive DP105 is low viscosity that allows for easy dispensing. Bonds to a wide variety of materials such as, metals, glass, ceramics, wood and many plastics.

    Specifications

    ApplicationHard Disk Drive Component Assembly
    BrandScotch-Weld
    Chemical BaseEpoxy
    ColorClear
    Container Volume50 Millilitre
    Full Cure48 hours @ 72 F (22 C)
    Hardness45 Shore D
    Industry - UseConstruction, Consumer Goods, Electronics, General Industrial, Military & Government, Specialty Vehicle, Transportation
    Mix Ratio Volume Base:Accelerator1 : 1
    Peel Strength at 72 Degrees F (22 Degrees C)35 Pound Per Inch (Of Width)
    Physical FormLiquid
    Product FormEach
    Shear Strength at 72 Degrees F (22 Degrees C)2000 Pound-Force Per Square Inch
    Shelf Life15 Month
    Specific Gravity1.13
    Storage Temperature72 Degree Fahrenheit
    Substrate 1EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rubber (Except EPDM), Wood & Hardboard
    Substrate 2EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rubber (Except EPDM), Wood & Hardboard
    Time to Handling Strength20 Minute
    TypeEpoxy Adhesive
    Units per Case12
    Viscosity Range (cps) at Room Temperature6,500
    Worklife4 minutes @ 72 F (22 C)