Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Epoxy Adhesive 2216 Gray Part B/A, 1 Gallon Kit, 2 per case

3M ID  62221674302    UPC#  00021200203589    3M Product Number  2216     
3M(TM) Scotch-Weld™ Epoxy Adhesive 2216 Gray Part A
3M(TM) Scotch-Weld™ Epoxy Adhesive 2216 Gray Part A
3M™ Scotch-Weld™ Epoxy Adhesive 2216 is a flexible, two-part epoxy adhesive. 2:3 mix ratio, 90 minute work life and handling strength in approximately 10 hours. This kit contains 2/3 gal. of part B and 1 gal. of part A
  • 90 minute worklife
  • Flexible bonds
  • Self leveling
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, gluing, joining, attaching, assembling, encapsulating, potting and sealing.
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    3M™ Scotch-Weld™ Epoxy Adhesive 2216 cures at room temperature and provides high strength bonds with exceptional performance in shear and peel. It can be used to bond rubber, metal, wood, most plastics and masory products. good environmental resistance.

    Specifications

    ApplicationHard Disk Drive Component Assembly
    BrandScotch-Weld
    Chemical BaseEpoxy
    ColorGray
    Consumer LabelNo
    Container Volume1 Gallon (US)
    Flammability Rating--USANASA STD 6001, UL94 HB
    Full Cure7 days @ 72 F (22 C)
    Hardness50-65 Shore D
    Industry - UseConstruction, Consumer Goods, Electronics, General Industrial, Military & Government, Specialty Vehicle, Transportation
    Mix Ratio Volume Base:Accelerator2 : 3
    Peel Strength at 72 Degrees F (22 Degrees C)25 Pound Per Inch (Of Width)
    Physical FormFlowable Liquid
    Product FormKit
    Shear Strength at 72 Degrees F (22 Degrees C)3200 Pound-Force Per Square Inch
    Shelf Life24 Month
    Specific Gravity1.32
    Storage Temperature72 Degree Fahrenheit
    Substrate 1EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Rubber (Except EPDM), Wood & Hardboard
    Substrate 2EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Rubber (Except EPDM), Wood & Hardboard
    Time to Handling Strength10 Hour
    TypeEpoxy Adhesive
    Units per Case2
    Viscosity Range (cps) at Room Temperature80,000
    Worklife90 minutes @ 72 F (22 C)