Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Acrylic Adhesive DP805 Off-White, 47 mL, 12 per case

3M ID  62328814355    UPC#  00021200837586    3M Product Number  DP-805     
3M(TM) Scotch-Weld(TM) Acrylic Adhesive DP805
3M(TM) Scotch-Weld(TM) Acrylic Adhesive DP805
3M™ Scotch-Weld™ Acrylic Adhesive DP805 is a two-part MMA-based adhesive. 1:1 mix ratio, 3 minute work life and handling strength in approximately 10 minutes. 3M™ Scotch-Weld™ EPX™ Plus II Applicator and mix nozzles are required (not included).
  • 3 minute work life
  • Minimal surface prep
  • Fast strength build up
  • Metal fabrication, signage, plastic, transportation, electronics, solar energy, wind energy, sporting goods, general industrial, elevators, agricultural equipment, heavy equipment and industrial machinery.
  • Bonding, gluing, adhering, joining, attaching, assembling, encapsulating, potting and sealing.
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    3M™ Scotch-Weld™ Acrylic Adhesive DP805 has high overlap shear and peel strength with good impact and durability to metals, wood and most plastic surfaces.

    Specifications

    BrandScotch-Weld
    Chemical BaseAcrylic
    ColorLight Yellow
    Container Volume47 Millilitre
    Flammability Rating--USAASTM E162, ASTM E662, Boeing BSS 7239
    Full Cure8-24 hours @ 72 F (22 C)
    Hardness79 Shore D
    Industry - UseConstruction, Consumer Goods, Electronics, General Industrial, Metalworking, Signage, Specialty Vehicle, Transportation
    Mix Ratio Volume Base:Accelerator1 : 1
    Peel Strength at 72 Degrees F (22 Degrees C)35 Pound Per Inch (Of Width)
    Physical FormFlowable Liquid
    Product FormEach
    Shear Strength at 72 Degrees F (22 Degrees C)3500 Pound-Force Per Square Inch
    Shelf Life9 Month
    Specific Gravity0.99
    Storage Temperature72 Degree Fahrenheit
    Substrate 1Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
    Substrate 2Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
    Time to Handling Strength10 Minute
    TypeAcrylic Adhesive
    Units per Case12
    Viscosity Range (cps) at Room Temperature110,000
    Worklife3 minutes @ 72 F (22 C)