Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Dyneon™ TFM™ 1600, 50 KG/ 110 LB DRUM (NEW 75L DRUM)

3M ID  97500008053    UPC#  00051135125564     
3M™ Dyneon™ TFM™ 1600, 50 KG/ 110 LB DRUM (NEW 75L DRUM)
Modified granular PTFE for molding and ram extrusion Dyneon™ TFM™ 1600 PTFE.
  • Free-flowing resin
  • Reduced melt viscosity and cold flow, deformation under load, and extractables
  • Lower porosity, permeability, void content
  • Excellent non stick and dielectric properties
  • Higher elastic modulus
  • Smoother surfaces, excellent weldability
  • Improved design flexibility
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    Suggested Applications
  • Isostatic, automatic, compression molded or ram extruded products
  • Skived film and sheet
  • Envelope gaskets requiring high blowout security
  • Ball-valve seats for reduced cold flow without the use of fillers
  • Lining systems
  • Semiconductor and chemical processing system components
  • Thermoformed products--blow molded or deep drawn goods
  • Dyneon™ TFM™ 1600 PTFE is a modified polytetrafluoroethylene (PTFE) that maintains the exceptional chemical and heat resistance properties of conventional PTFE, but has a significantly lower melt viscosity giving better particle fusion during sintering and smoother surfaces. Dyneon™ TFM 1600 PTFE is a free-flowing powder for compression molding, isostatic molding, automatic molding, and ram extrusion.

    Specifications

    Average Particle Size450
    Bulk Density830
    CapabilitiesChemical Resistance, Temperature Resistance
    Deformation Under Load2
    Elongation at Break450
    Industry - UseCPI/Semicon, Electrical, Oil and Gas, Rubber and Plastic, Transportation
    Shrinkage3.5
    Specific Gravity2.16
    Tensile Strength4600 Pound-Force Per Square Inch