Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Dyneon™ PTFE TF 1645, 50 KG/110 LB DRUM (NEW 75L DRUM)

3M ID  97500008046    UPC#  00051135125526     
3M™ Dyneon™ PTFE TF 1645, 50 KG/110 LB DRUM (NEW 75L DRUM)
Granular PTFE for molding and ram extrusion.
  • Service temperature range from (-200°C to 260°C).
  • Also sold compounded to enhance properties
  • Chemical resistance.
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    Suggested Applications
  • Film/tape
  • Electrical insulation
  • Hose/Tubing
  • Linings
  • Coatings for architectural fabrics
  • Coatings for conveyor belts
  • Gaskets/Seal Rings/O-rings
  • Valves
  • Pumps
  • Packings
  • Diaphrams
  • Bearings
  • Sheet and Film
  • Tapes
  • Wafer Carriers
  • Semi-finished parts
  • PTFE has rapidly become the material choice where low friction, high durability, excellent thermal resistance and chemical inertness characteristics are required. Dyneon™ PTFE resins are distinguished by their consistency and unique physical properties. They are available as granular polymers, fine powders, dispersions, and micropowders.

    Specifications

    Average Particle Size450
    Bulk Density830
    CapabilitiesChemical Resistance, Temperature Resistance
    Deformation Under Load4
    Elongation at Break350
    Industry - UseCPI/Semicon, Electrical, Oil and Gas, Rubber and Plastic, Transportation
    Shrinkage2.6
    Specific Gravity2.15
    Tensile Strength4000 Pound-Force Per Square Inch