Electrical Solutions

3M™ 8882-3000/F 3297ML High Gel Foil Closed Mixing Pouch Reenterable Encapsulant

This completely reenterable encapsulant uses a new compound technology. It delivers a high level of adhesion and excellent moisture protection at low cost.

3M™ Cable Tie Base 06296, Adhesive Mount, Natural/Nylon, 1 in x 1 in, 100 per bag

This base has a height of 0.21 Inches, a slot height of 0.07 Inches, and a slot width of 0.20 Inches. This particular base also has four entry locations.

3M™ CC-Series Cable Cleaning Products

This cable cleaning system cleans cable insulation, metal, electrical, and mechanical parts. CC Series solvent is also suitable for use on transformers, generators, motors and metal parts of all sorts.

3M™ Dynatel™ 2200M Series Cable/Pipe Locators

Dynatel™ 2200M Series Cable/Pipe Locators unique features include configuration tools to tailor the locator to user needs, user definable frequencies and help screens. The 2200M-iD option enables users to read and write facility or user data to the new 1400 series iD markers. The Dynatel™ 2200M Series represents the state of the art in underground locating technology.

3M™ Novek™ Aerosol Cleaners

3M™ Novec™ Aerosol Cleaners are a revolutionary line of non-flammable, high-performance cleaners: 3M™ Novec™ Electronic Degreaser, Contact Cleaner and Flux Remover. Novec Aerosol Cleaners are based on proprietary 3M formulations. With a favorable environmental profile, Novec Aerosol Cleaners are non-ozone depleting and contain no nPB, HFCs or HAPS.

Connectors, Disconnects and Terminals

Includes: Wire, butt and spring connectors, nylon female and male disconnects and pin, ring and fork terminals.

Corrosion Protection

Scotchrap 50 and 51 Tapes are tough, polyvinyl chloride based tapes with special high tack adhesives formulated to resist corrosion of metal piping systems above and below ground, fittings and joints on all mill-coated pipe and electrical conduit systems.

Electrical Tape

3M invented vinyl electrical tape and sets the industry standard for quality with a tape for nearly every electrical application. Such electrical tape applications include: marking, insulating, and splicing.

Infrared Thermometers

Infrared thermometers are highly accurate and easy-to-use, portable non-contact (infrared) thermometer. It is an invaluable tool for monitoring operating termperatures of mechanical and electrical , plant and production equipment without removing the equ

Insulating Aerosoles

Protect surfaces against weather, moisture, corrosion, oil, alkalies and acids with the 1601, 1602 and 1603 Insulating Sprays.

Jacketing Products

Protect and repair damaged electrical cable jacketing with heat shrink cable sleeves, jacket repair kits, and resins.

Lubricant Products

Wire pulling lubricants are designed for specific applications, so you can choose the right lubricant for the job at hand. You can count on 3M reliability through high pulling forces, extreme temperature changes, wet weather and the damaging effects of t

Mine and Portable Cable Connectors

Scotchcast™ Resin Compound

2130 is a flexible, permanent, flame retardant, urethane resin used for jacket repair or splicing portable cables.

Scotch® Electrical Grounding Braid 25, 1/2 in x 15 ft (13 mm x 4,6 m), 1 per case

This is a flat, all-metal woven electrical grounding braid that has a high current carrying capacity approximately of 6 AWG wire. Packed 1 roll per box.

Splices

The following splice solutions can help you reduce the time, labor and cost involved in a variety of electrical cable splicing applications.

Terminations

3M terminations offer easy installation and reliable performance when terminating shielded and non shielded, single and three-conductor, and indoor and outdoor medium voltage cables.

Wire Markers

Use Scotchcode™ Wire Marker dispensers and books to quickly mark wires or cables.