Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map
3M Food Safety Products > Hygiene Monitoring > Hygiene Monitoring Tests > 

3M™ Clean-Trace™ Water ATP

3M™ Clean-Trace™ Water ATP
Click to Enlarge

Real-time ATP water hygiene test which gives an objective indication of cleanliness in CIP water samples in seconds.

A dedicated ATP water test that is designed to prevent sampling inaccuracy inherent in collecting a water sample with a swab. Its overall simplicity makes it a powerful addition to your hygiene program. Results measured in the 3M™ Clean-Trace™ NG Luminometer and provided in Relative Light units (RLU).

ImageCatalog #ProductDescriptionSDS
3M(TM) Clean-Trace(TM) Water - Free ATP swabs  AQF100  3M™ Clean-Trace™ Water - Free ATP Test Swab AQF100, 100 per case 3M™ Clean-Trace™ Water-Free ATP AQF100 is a single-use test device that contains sample collection rings for the collection of an aqueous sample. PDF  
3M(TM) Clean-Trace(TM) Water Plus - Total ATP swabs3M Clean-Trace Water - Total ATP Test Sell Sheet - Flyer (PDF 364.9 K)3M Clean-Trace Water Plus – Total ATP Test Swab - News Release (PDF 27.1 K)Comparison of AQT200 Performance to Current Product AQT100 - Bulletin (PDF 1.5 MB)Competitive Comparison for AQT200 - Bulletin (PDF 140.8 K)Eval of Water ATP Tests for Operating Temp and Signal Decay - Article Reprint (PDF 637.0 K)Reviewing Pass/Fail Levels when Switching from AQT100 to AQT200 - Bulletin (PDF 607.6 K)  AQT200  3M™ Clean-Trace™ Water Plus - Total ATP AQT200, 100 per case 3M™ Clean-Trace™ Water Plus - Total ATP AQT200 is designed to rapidly assess equipment sanitation processes and the efficiency of Clean in Place (CIP) procedures. PDF  
3M(TM) Clean-Trace(TM) Surface Positive Control  LWATP10  3M™ Clean-Trace™ Water Positive Control LWATP10, 10 per case 3M™ Clean-Trace™ Water Positive Control LWATP10 is designed to enhance hygiene monitoring procedures by providing cost effective assurance that 3M hygiene monitoring reagents and instruments are being used and stored correctly to ensure reliable results. PDF  

  • Allows you to understand the hygiene status of your CIP system in seconds
  • Helps reduce risk of cross contamination due to poor cleaning
  • Allows optimization of Biocide programs
  • Helps protect your reputation

  • Article Reprint

    PDFEval of Water ATP Tests for Operating Temp and Signal Decay - Article Reprint (PDF 637.0 K)

    Case Study

    PDFGold'n Plump Best Practice Article - Case Study (PDF 843.7 K)


    PDF3M Clean-Trace Sensitivity and Repeatability Summary - Flyer (PDF 391.7 K)
    PDF3M Clean-Trace Water - Total ATP Test Sell Sheet - Flyer (PDF 364.9 K)

    Technical Paper

    PDF3M Clean-Trace Repeatability Study - Technical Paper (PDF 439.7 K)
    PDF3M Clean-Trace Sensitivity Study - Technical Paper (PDF 231.3 K)

    Regulatory Material

    Click to Chat


    Never used 3M Petrifilm Plates?

    Contact us to get started