Skip to 3M.com Primary Navigation Skip to Site Navigation Skip to Main Content

Steps 11-12


Step 11

With air line connected, invert gun and pull trigger (full open, not partial) to bleed air from the liner.

   With air line connected, invert gun and pull trigger (full open, not partial) to bleed air from the liner.

Step 12

Air only needs to be bled if spraying is to be done in the inverted position.

   Air only needs to be bled if spraying is to be done in the inverted position.

Intro | Steps 1-2 | Steps 3-4 | Steps 5-6 | Steps 7-8 | Steps 9-10 | Steps 11-12 | Steps 13-14 | Steps 15-16 |

Spray Gun Adapters | Premixed Paint | Cleaning | Order Info

Next Steps >>>

For safety always wear goggles, face shield and proper respirator when grinding or sanding or spraying. For safety always wear goggles, face shield and proper respirator when grinding or sanding or spraying.