Personal Protection Products > Surgical Masks >

3M™ High Fluid Resistant Surgical Mask

These surgical masks meet ASTM highest level of fluid resistance (160 mmHg), to help reduce exposure of the wearer to blood and body fluids, large particle droplets and aerosolized fluids.

These breathable, light green tie-on masks offer the healthcare professional higher fluid resistance when needed. They are available with a face shield (Catalog No. 1835FS) or without a face shield (Catalog No. 1835) to wear with your own protective eyewear.

Image	Catalog #	Product	Description
	1835	3M™ High Fluid Resistant Surgical Mask 1835	High Fluid Resistant Surgical Mask, 50/box, Light Green
	1835FS	3M™ High Fluid Resistant Surgical Mask with Face Shield 1835FS	High Fluid Resistant Surgical Mask with Face Shield, 50/box, Light Green

Benefits

Highly fluid- and splash-resistant; passes ASTM’s highest level of protection (160 mmHg).

The 1835FS is equipped with an anti-fog-coated face shield and black strip over nose to help reduce glare on face shield.

Flat with bi-directional pleats and vertical ties.

Filtration efficiency: BFE{1} = >99%, PFE{2} = >99%.

Latex free.

{1} - Bacterial Filtration Efficiency (BFE) determined by in vitro test method.
{2} - Particle Challenge Study - measures filter efficiency only against mass median aerodynamic diameter particle. Surgical mask tests were conducted by an independent laboratory following a 3M internal protocol and using a 0.1 micron latex sphere at a flow rate of 28.3 liters per minute. PFE test results are provided for comparing performance of surgical masks under similar laboratory conditions. This does not reflect expected levels of filtration efficiency in actual use conditions nor replace the need to use NIOSH certified respirators if exposed to hazardous airborne contaminants.

Suggested Applications

Operating Room

Emergency Room

Infection Control Practices

Sterile Processing Department

Cardiac Cath Laboratory

Brochure