Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Scotch-Brite™ High Strength Disc, 6 in x 1/4 in A VFN, 10 per inner, 40 per case

3M ID  61500149929    UPC#  00048011277486     
Scotch-Brite(TM) High Strength Disc, 4 - 6 in
Scotch-Brite(TM) High Strength Disc, 4 - 6 in
Scotch-Brite™ High Strength Disc is a general purpose disc made of a durable, tough web and is designed to effectively clean, deburr, denib/defuzz, and achieve satin finishes in conjunction with its very fine grade silicon carbide abrasive. The durable, non-woven, open-web construction resists loading and runs cool to keep the abrasives cutting at a consistent rate throughout the life of the disc.
  • Durable open-web disc deburrs, denibs/defuzz, and cleans a wide variety of metals
  • Conformable disc with wear-resistant edge provides consistent finishes and long disc life
  • Can be stacked to expand use or cover larger surface areas
  • Load resistance extends cut rate throughout the life of the disc
  • Tough, non-woven material allows heavy-duty use
Need Help?

Questions? We can help

Contact Us

 

Overview

Conformability allows the Scotch-Brite™ High Strength Disc to work well on irregular surfaces and into tight areas without damaging the base material. This disc may be used individually or stacked on a straight shaft tool or bench motor to condition larger areas, bar grates, louvers, vents, and tracks.

Our Scotch-Brite™ High Strength Disc Wheel is filled with very fine grade (VFN) silicon carbide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.

Scotch-Brite™ is a unique surface conditioning product with abrasives incorporated into non-woven nylon fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibers.

Specifications

Application CategoryAdhesives, Coatings, Sealant Corrosion Removal, Blending/Deburring, Cleaning, Finishing/Polishing
ApplicationsCleaning, Coating Removal, Contour Finishing, Deburring, Finishing, Weld Cleaning
BrandScotch-Brite™
Center Hole Diameter0.25 Inch
ColorMaroon
Converted FormDisc, Regular Attachment
Diameter6 Inch
Diameter (Metric)152.4 mm
Equipment - MachinesBackstand
GradeVFN
IndustriesAerospace, General Industrial, Metalworking, MRO, Transportation & Heavy Equipment
Max RPM4000
Mineral TypeAluminum Oxide
PositionGood
Primary ApplicationMetalworking, Paint Prep, Coating & Corrosion Removal
Product FormDisc
Sub IndustriesMetal Fabrication
US Govt Contract NumberGS-21F-0075x