Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

Tech Talk: What Does "Grit" Mean?

October 11, 2012

A variety of different methods and standards are used to describe the aggressiveness of commercial abrasives. Different standards are used for coated abrasives (sand papers) and bonded abrasives (grinding wheels and diamond floor polishing abrasives) as well as specific standards for some specialty abrasive particles like diamond. All of the standards use size as an indication of how aggressive the abrasive particle will be.

Where "Grit" comes from:

Before examining grit we need to understand some fundamentals of particle size grading. Historically a sequential series of screens was used to sort particle sizes. Each of these screens has a differing number of wires and openings per inch. As material passes through one screen and is retained on another we can sort them into size categories. ANSI B74.12 defines the size distribution of particles allowed to be contained in a certain "grit" of abrasive. Grit is therefore not a designation of specific particle size, but a description of a specific distribution of particle sizes.

A Closer Look at "Grit":

Conventional designation of abrasives by "grit" results in a wide particle size distribution for each grit. For example ANSI B74.12 specifies that to be considered a 100 grit abrasive all the material must pass through a standard 70 screen with a maximum of 20% of the material being retained on a standard 100 screen. This means that up to 20 percent of the material is larger (more coarse) than the standard 100 screen opening while, at least 80% is smaller (finer) than the standard 100 screen opening. This wide distribution of particle size means that scratch patterns will be inconsistent, with larger particles leaving deeper scratches and finer particles leaving shallow scratches. This varied scratch pattern must be able to be removed by the next abrasive used. This has led to the convention in the stone polishing world that you should never more than double the grit of the previous step when moving on to the next. For example, if we began honing the floor with a 60 grit abrasive, a sample progression would be; 60, 120, 220, 400, 800, 1500, and 3500 abrasive steps.

A better way to think about abrasives:

The most important two factors to consider in an abrasive are the amount of work that will be performed (aggressiveness) and the resulting surface profile

Notice to Reader

The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Many factors beyond 3M’s control and uniquely within the user’s knowledge and control can affect the use and performance of a 3M product in a particular application Given the variety of factors that can affect the use and performance of a 3M product, the user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.

Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the performance and useful life of 3M’s work area flooring products, including the type and preparation of the surface, and the conditions of use. User is solely responsible for evaluating the 3M flooring product and determining whether it is fit for user’s particular purpose, adequately maintained, and replaced at the end of its useful life.

Warranty and Limited Remedy: 3M warrants that each 3M product will be free from defects in material and manufacture for 90 days from the date of purchase from 3M’s authorized distributor. 3M MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If a 3M product does not conform to this warranty, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted.

   Return to: