Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Chemical Sorbent Roll C-RL38150DD, Environmental Safety Product, High Capacity, 1 ea/cs

Chemical sorbent roll can be easily cut to cover small areas or fit tight corners. Rolls of sorbent material are used for large spill management or in areas where spills may occur. May be used to cover bench tops in prep for a spill or as a work surface.

High capacity sorbents have a scrim on one side to increase strength and help eliminate linting. Rolls of sorbent material are used to cover and sorb large spills or in areas where spills may occur. They can be cut to the desired length and are the most economical way to purchase sorbent.Each roll is 38 inches X 150 feet (76 gallons/roll).


Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations.
Sorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
TitleContent TypeFile TypeSize
3M™ Chemical Sorbents, Technical Data SheetDoc/Data SheetPDF192   KB
3M™ Spill Management BrochureDoc/Data SheetPDF3   MB


Where to Buy

Find a Distributor
Buy Online at Shop3M

Need Help?

For questions or help finding the right product, please contact us.
Request a Product Demo

3M™ Stone Floor Protection System