Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Maintenance Sorbent Pillow M-PL715, Environmental Safety Product, High Capacity, 16 ea/cs

Maintenance sorbent pillows are designed with a scrim that encases particulate sorbent material. Used in areas where greater capacity than a sorbent pad is desired. Small and lightweight, pillows are tear-resistant.

These pillows have a high capacity for holding liquid. Ideal for use in a drip pan, under equipment or at the source of a leak. Each case contains 16 pillows (each 7 inch by 15 inch) which will sorb 0.5 gallons.

3M

Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations.
Caution
Sorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
web-warning-9
Title Content Type File Type Size
Doc/Data Sheet PDF 28   KB
3M™ Maintenance Sorbents Doc/Data Sheet PDF 27   KB
Sorbents For Maintenance, Petroleum, and Chemicals Doc/Data Sheet PDF 3   MB

 

Where to Buy

Find a Distributor
Buy Online at Shop3M
 

Need Help?

For questions or help finding the right product, please contact us.
Request a Product Demo

3M™ Stone Floor Protection System

 

Test 3M™ Products

Register to become a customer researcher for 3M™, Scotch-Brite™, and Scotchgard™ Facility Care and Cleaning Products.


Register Now