Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Static Control Surface Mark Remover 8001, Quart, 12/case

The 3M Static Control Surface Mark Remover 8001 is an extra-strength fluid that is designed to remove ordinary dirt and grime as well as difficult spots and stains from all types of static control surfaces.

Unlike many cleaning products, the 3M Static Control Surface Mark Remover 8001 is not corrosive, per FTMS 101C, Method 3005, and leaves no tacky residue that attracts dirt, attacks delicate parts, or increases the contact resistance of the surface. It is a clear, colorless, homogeneous, water-based liquid that contains detergents, conditioners and other cleaning additives and has a fresh, clean scent.3M laboratory tests have proven the cleaner to be an excellent topical antistat, maintaining a consistent surface resistivity (1x1011 ohm/square) over extended periods in both normal (55% RH) and dry (13% RH) environments. Simply spray on any washable surface and wipe off with a clean cloth or sponge — no rinsing required. The cleaner is designed to be used full-strength and supplied in handy quart spray bottles.

TitleContent TypeFile TypeSize
Doc/Data SheetPDF50   KB

 

Where to Buy

Find a Distributor
Buy Online at Shop3M
 

Need Help?

For questions or help finding the right product, please contact us.
Request a Product Demo

3M™ Stone Floor Protection System

 

Test 3M™ Products

Register to become a customer researcher for 3M™, Scotch-Brite™, and Scotchgard™ Facility Care and Cleaning Products.


Register Now