Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Specialty Additives

Search Products

Let's Work Together

Contact Us
6 Results (Displaying results 1-6)
1
Switch to list view
Sort by:
Results per page:
6 Results (Displaying results 1-6)
1
-->

Literature

Processing Additives in High Density Polyethylene Extrusion Blow Moulding Applications
Reducing Antiblock and PPA Interactions for Improved Blown Film Melt Fracture Elimination
Die Build-up During Polyolefin Processing: Polymer Design, Fluoropolymer-Based Processing Additives
Die Geometry and Polymer Processing Additives (PPAs) Efficiency
Analysis of Dynamar PPAs in Polyolefins Using X-ray Fluorescence Spectrometry
Dynamar™ Fluoropolymer Processing Additives (PPAs) in Applications of HDPE Pipes
Effects of Anti-Block/Processing Aid Combinations on LLPDE Blown Film Extrusion
The Application of Fluoropolymer Based Processing Aids in Polypropylene and Thermoplastic Rubber
Fluoropolymer Processing Additive and Stearate Additive Levels Effect on Processing of HDPE Resins
Using Fluoropolymer Processing Additives to Improve Extrusion Characteristics of LDPE/LLDPE Resins
Using Fluoropolymer Based Processing Additives to Improve the Extrusion High Viscosity LLDPE Resins
Factors Affecting the Interaction of Polyolefin Additives with Fluorocarbon Elastomer PPAs
Effect of MWD on the Amount of PPA Required to Suppress Sharkskin Melt Fracture in LLDPE
New Approaches to the Processing of Rutile-Filled Polyolefins
Polymer Processing Additives and Anti-Oxidants...Extruding Under the Influence
Influence of PPA and Hindered Amine Light Stabilizer (HALS) Combos in LLDPE Blown Film Applications
Die Geometry and Polymer Processing Additives (PPAs) Efficiency
An Investigation of PPA Effect on Melting, Gel Formation Mechanisms in a Single Screw Extruder
The Use of Polymer Processing Aids to Reduce Gel Formation in Polyolefin Plastomer Extrusion
Influence of PPAs and Hindered Amine Light Stabilizer (HALS) Combos in LLDPE Blown Film - Part IIA
The Influence of PPAs on The Surface, Mechanical, and Optical Properties of LLDPE Blown Film
The Influence of PPPs on the Surface and Optical Properties of Polyolefin Plastomer Blown Film
Processing Additives and Acid Neutralizers—Formulation Options in Polyolefins
The Effects of Processing Aids on the Hot-Tack Properties of LLDPE Blown Films
A New Perspective on Additive Interactions and Optimizing PPA Efficiency Through Process Parameters
Visualizing the elimination of sharkskin through PPAs: Coating and polymer–polymer slippage
The use of Polymer Processing Additives (PPAs) to Improve Melt Processing of m-LLDPE Extrusion

3M™ Dynamar™ Specialty Additives

3M's Specialty Additives are used at very low levels (200-1000 ppm) and are designed to improve the extrusion processing of polyolefins and other polymers, based on 3M's time-tested formulations and technologies.