Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Dyneon™ TFM™ 1600

 
PIC PTFE free flow
PIC PTFE free flow
Modified granular PTFE for molding and ram extrusion with very good free-flow properties.
  • Free-flowing resin
  • Reduced melt viscosity and cold flow, deformation under load, and extractables
  • Lower porosity, permeability, void content
  • Excellent non stick and dielectric properties
  • Higher elastic modulus
  • Smoother surfaces, excellent welda
  • Improved design flexibility
Need Help?

Questions? We can help

Contact Us

 

Overview

Modified granular PTFE for molding and ram extrusion Dyneon(TM) TFM(TM) 1600 PTFE, 50 kg / 110 lb drum

Typical Properties

 Average Particle Size‎‎ 450
 Bulk Density‎‎ 830
 Capabilities‎‎ Temperature Resistance,‎ Chemical Resistance
 Elongation at Break‎‎ 450
 Industries‎‎ Transportation,‎ Rubber and Plastic,‎ Electrical,‎ Oil and Gas,‎ CPI/Semicon
 Shrinkage‎‎ 3.5
 Specific Gravity‎‎ 2.16
 Tensile Strength‎‎ 4600 lb/ft²