Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Dyneon™ Fluoroelastomer FC 2210

 
PIC Fluoroelastomer
PIC Fluoroelastomer
FC 2210 is a di-polymer of vinylidene fluoride and hexafluoropropylene. This ultra low viscosity fluoroelastomer is used primarily injection and transfer molding, extrusion, calendering and coatings.
Need Help?

Questions? We can help

Contact Us

 

Support

Data Sheet

Overview

Typical Properties

CapabilitiesTemperature Resistance
Container Volume35 Gallon, 1 Gallon, 55 Gallon
Cure TechnologyRaw Gum
Elongation0 Percent
Fluorine Content65.9
IndustriesRubber and Plastic
Post Cure24 h @ 250°C
Press Cure7 min @ 177°C
Product FormBox
Specific Gravity1.8