3M™ Thermally Conductive Silicone Interface Pad 5592
3M™ Thermally Conductive Silicone Interface Pad 5592 is a soft, silicone elastomer with thermal conductivity of 1.1 W/m-K. Conformable at low pressure to minimize stress on components and fill gaps. Good dielectric properties.
Features and Benefits
Good thermal stability of the base polymer with excellent softness of the thermal pad.
Good thermal conductivity in a soft silicone polymer base.
The product tack is such that a mechanical means to support the pad in a final assembly is required.
Gap filling parts in electronic components
IC Packaging Heat Conduction
Heat Sink Bonding
Chip Heat Conduction
LED Board TIM
HD TV Address IC Chip and Scan Module Board
Application Battery Thermal Management, LED Lighting Thermal Management, Thermal Gap Pad, Thermal Interface-Damping-Cushioning
Application Category Thermal Interface Materials
Base Material Filled Silicone Polymer
Carrier Type No Carrier
Dielectric Strength 14.7 kV/mm
Easy Release Top Liner Type PET Film
Flammability Rating UL 94 V-1 (1.0mm T and less) UL 94 V-0 (Over 1.0mm T)
Hardness Shore 00 = 40 to 50
Liner Type Double
Product Series 5592
Thermal Conductivity 1.1 W/m-K
Thermal Impedance 0.70 Degree C-in^2/W (20.0 mil), 1.21 Degree C-in^2/W (40.0 mil), 1.71 Degree C-in^2/W (60.0 mil), 2
Thermal Impedance (metric) 4.1 Degree C-cm^2/W (0.50 mm), 7.4 Degree C-cm^2/W (1.0 mm), 10.7 Degree C-cm^2/W (1.5 mm), 15.7 De
Tight Side Release Liner Type PET Film
Total Tape Thickness without Liner 20.0 mil, 40.0 mil, 60.0 mil, 80.0 mil
Total Tape Thickness without Liner (metric) 0.50 mm, 1.0 mm, 1.5 mm, 2.0 mm
Product Disclaimer The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability.