Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Thermally Conductive Silicone Interface Pad 5516S

3M ID  AM000003658     
3M(TM) Thermally Conductive Silicone Interface Pad 5516S
3M(TM) Thermally Conductive Silicone Interface Pad 5516S
Thermally Conductive Adhesive Transfer Tape Heat Sink
3M(TM) Thermally Conductive Interface Pads
3M(TM) Thermally Conductive Interface Pads
3M™ Thermally Conductive Silicone Interface Pad 5516S is the same as 3M Pad 5516 but with a polymeric permanent film on one side for ease of reworking an assembly. Thermal Conductivity and Impedance slightly changes, dielectric strength is improved.
Features and Benefits
  • Good thermal conductivity (3.1 w/m-k)
  • Good softness and is conformable at low pressure ( Shore 00 =72)
  • Softness results in low stress on board components
  • Good dielectric properties
  • “S” version incorporates a thin polymeric film carrier for improved handling and a non-tacky surface for ease of rework
  • Slight tack allows pre-assembly. Good wettability for better thermal conductivity
  • UL 94 V-1
  • High temperature résistance
  • Tacky both sides
  • Thickness : 0.5 mm,1.0 mm, 1.5 mm, 2.0 mm, custom thickness
  • Larger sheet size is available
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    Product Attributes

    ApplicationBattery Thermal Management, LED Lighting Thermal Management, Thermal Gap Pad, Thermal Interface-Damping-Cushioning
    Application CategoryThermal Interface Materials
    Base MaterialFilled Silicone Polymer
    Carrier TypePermanent PEN film
    ColorGray
    Dielectric Strength16.0 kV/mm
    Easy Release Top Liner TypeNo Liner
    Flammability RatingUL 94 V-1 (1.0mmT and less) UL 94 V-0 (over 1.0mm T)
    HardnessShore 00 = 72
    Liner TypeSingle
    Product Series5516S
    Thermal Conductivity3.1 W/m-K
    Thermal Impedance0.31 Degree C-in^2/W (20 mil), 0.53 Degree C-in^2/W (40.0 mil), 0.75 Degree C-in^2/W (60.0 mil), 0.9
    Thermal Impedance (metric)2.0 Degree C-cm^2/W (0.50 mm), 3.4 Degree C-cm^2/W (1.0 mm), 4.9 Degree C-cm^2/W (1.5 mm), 6.3 Degr
    Tight Side Release Liner TypePET Film
    Total Tape Thickness without Liner20.0 mil, 40.0 mil, 60.0 mil, 80.0 mil
    Total Tape Thickness without Liner (metric)0.50 mm, 1.0 mm, 1.5 mm, 2.0 mm

    Product Disclaimer

  • The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
  • 3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability.