Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Thermally Conductive Silicone Interface Pad 5516

3M ID  AM000003542     
3M(TM) Thermally Conductive Silicone Interface Pad 5516
3M(TM) Thermally Conductive Silicone Interface Pad 5516
Thermally Conductive Adhesive Transfer Tape Heat Sink
3M(TM) Thermally Conductive Interface Pads
3M(TM) Thermally Conductive Interface Pads
3M™ Thermally Conductive Silicone Interface Pad 5516 is a highly conformable, slightly tacky silicone elastomer pad. Designed to provide heat transfer path between heat generating components and heat sinks, heat spreaders or other cooling devices.
Features and Benefits
  • Good thermal conductivity (3.1 w/m-k)
  • Good softness and is conformable at low pressure ( Shore 00 = 50)
  • Softness results in low stress on board components
  • Good dielectric properties
  • Slight tack allows pre-assembly. Good wettability for better thermal conductivity
  • UL 94 V-0
  • High temperature résistance
  • Tacky both sides
  • Thickness : 0.5 mm,1.0 mm, 1.5 mm, 2.0 mm, custom thickness
  • Larger sheet size is available
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    Product Attributes

     Application‎ Battery Thermal Management‎ ,  LED Lighting Thermal Management‎ ,  Thermal Gap Pad‎ ,  Thermal Interface-Damping-Cushioning‎
     Application Category‎ Thermal Interface Materials‎
     Base Material‎ Filled Silicone Polymer‎
     Carrier Type‎ No Carrier‎
     Color‎ Gray‎
     Dielectric Strength‎ 13.1 kV/mm‎
     Easy Release Top Liner Type‎ PET Film‎
     Flammability Rating‎ UL 94 V-0‎
     Hardness‎ Shore 00 = 50‎
     Liner Type‎ Double‎
     Product Series‎ 5516‎
     Thermal Conductivity‎ 3.1 W/m-K‎
     Thermal Impedance‎ 0.31 Degree C-in^2/W (20 mil), 0.53 Degree C-in^2/W (40.0 mil), 0.75 Degree C-in^2/W (60.0 mil), 0.9‎
     Thermal Impedance (metric)‎ 2.0 Degree C-cm^2/W (0.50 mm), 3.4 Degree C-cm^2/W (1.0 mm), 4.9 Degree C-cm^2/W (1.5 mm), 6.3 Degr‎
     Tight Side Release Liner Type‎ PET Film‎
     Total Tape Thickness without Liner‎ 20.0 mil‎ ,  40.0 mil‎ ,  60.0 mil‎ ,  80.0 mil‎
     Total Tape Thickness without Liner (metric)‎ 0.50 mm‎ ,  1.0 mm‎ ,  1.5 mm‎ ,  2.0 mm‎

    Product Disclaimer

  • The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
  • 3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability.