3M™ Thermally Conductive Silicone Interface Pad 5515
3M™ Thermally Conductive Silicone Interface Pad 5515 is designed to provide a preferential heat transfer path between heat generating components and cooling device for thin thickness (0.2-0.25 mm) requirement.
Features and Benefits
Good thermal conductivity (3.0 W/m-K)
Hardness : Shore 00 = 80
Good dielectric properties
UL 94 V-0
High temperature resistance
Good converting for complicated shape
Good flexibility with over bending
Thin thickness for lower thermal impedance.
Roll is available
Application Battery Thermal Management, LED Lighting Thermal Management, Thermal Gap Pad, Thermal Interface-Damping-Cushioning
Application Category Thermal Interface Materials
Base Material Filled Silicone Polymer
Carrier Type No Carrier
Dielectric Strength 14.5 kV/mm
Easy Release Top Liner Type PET Film
Flammability Rating UL 94 V-0
Hardness Shore 00 = 80
Liner Type Double
Product Series 5515
Thermal Conductivity 3.0 W/m-K
Thermal Impedance 0.13 Degree C-in^2/W (8.0 mil), 0.16 Degree C-in^2/W (10.0 mil)
Thermal Impedance (metric) 0.8 Degree C-cm^2/W (0.20 mm), 1.0 Degree C-cm^2/W (0.25 mm)
Tight Side Release Liner Type PET or PE Film
Total Tape Thickness without Liner 10.0 mil, 8.0 mil
Total Tape Thickness without Liner (metric) 0.20 mm, 0.25 mm
Product Disclaimer The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability.