Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Novec™ 2708 Electronic Grade Coating

3M ID  AM000002429     
3M(TM) Novec(TM) 2708 Electronic Grade Coating
3M(TM) Novec(TM) 2708 Electronic Grade Coating
Coatings
3M™ Novec™ 2708 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components. It is a low viscosity solution of a 8 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. It is UV detectable.
Features and Benefits
  • Easy application and processing - dries in seconds without the need for thermal post-curing
  • Requires little or no masking
  • Allows solder-through repairability and is easily removed for rework & repair
  • Contains a low level of volatile organic compounds (VOCs) and has low global warming potential
  • Is thermally and electrically stable with excellent dielectric properties
  • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
  • Contains a UV fluorescent dye incorporated into the polymer for improved QC inspection
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    Product Attributes

    ApplicationCorrosion Protection, Migration Resistance, Moisture Protection, Stiction Reduction
    Application CategoryCoating
    Application MethodSolution applied by dipping (preferred), spray, or syringe dispense
    Available Container Sizes11 lb (5 kg) 1 Gal Container, 33 lb (15 kg) 3.5 Gal Container
    BrandNovec
    Coating LocationInside Electronic Device
    Coating Thickness (Dip Coated)500 nm - 1 µm (depending on application method)
    Dielectric Constant2.8 (@1kHz, 30%RH)
    Dielectric Strength3700 V/mil (@ 35% RH)
    Dissipation Factor0.011 (@1kHz, 30% RH)
    Dry Time5-60 Seconds
    Polymer TypeFluoroacrylate
    Product SeriesNovec 2708
    Product UseComposites, Printed Circuit Boards (PCB), Solder Joints, Surface Mount Components
    RemovabilityRemovable with a variety of 3M™ Novec™ Engineered Fluids
    Solids Level8%
    Thermal Cure Time and TemperatureNo need to cure

    Product Disclaimer

  • See Technical Data Sheet (TDS) for proper use recommendations and Material Safety Data Sheet (MSDS) for safety information.
  • The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
  • 3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability.