Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Novec™ 2702 Electronic Grade Coating

3M ID  AM000002403     
3M(TM) Novec(TM) 2702 Electronic Grade Coating
3M(TM) Novec(TM) 2702 Electronic Grade Coating
Coatings
3M™ Novec™ 2702 Electronic Grade Coating is designed for protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 2 wt% fluorochemical polymer coating carried in a hydrofluoroether solvent. The coating is easy to apply and should be heat cured.
Features and Benefits
  • Low surface tension of the coating solution provides increased surface wetting, especially under low profile components
  • Cross-links with a thermal cure for durable protection
  • Contains no volatile organic compounds (VOCs) and has low global warming potential
  • Can be applied to metals, glass or epoxy laminates
  • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids ie: water, hydrocarbons, silicones, and photoresists
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    Product Attributes

     Application‎ Anti-Stiction‎ ,  Chemical Protection‎ ,  Corrosion Protection‎ ,  Moisture Protection‎
     Application Category‎ Coating‎
     Application Method‎ Solution applied by dipping (preferred), spray, or syringe dispense‎
     Available Container Sizes‎ 11 lb (5 kg) 1 Gal Container‎
     Brand‎ Novec‎
     Coating Location‎ Inside Electronic Device‎
     Coating Thickness (Dip Coated)‎ 100 nm - 1 µm, (depending upon application method)‎
     Dielectric Constant‎ 3.04 (@1kHz, 30% RH)‎
     Dielectric Strength‎ 1500 V/mil (@ 35% RH)‎
     Dissipation Factor‎ 0.04 (@1kHz, 30% RH)‎
     Dry Time‎ 30-90 Seconds‎
     Polymer Type‎ Fluorinated Hybrid‎
     Product Series‎ Novec 2702‎
     Product Use‎ Composites‎ ,  Printed Circuit Boards (PCB)‎ ,  Solder Joints‎ ,  Surface Mount Components‎
     Removability‎ Permanent‎
     Solids Level‎ 2%‎
     Thermal Cure Time and Temperature‎ 15 to 60 Minutes @ 70-150 Degree C‎

    Product Disclaimer

  • See Technical Data Sheet (TDS) for proper use recommendations and Material Safety Data Sheet (MSDS) for safety information.
  • The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
  • 3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability.