Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Miscellaneous Cable Accessory Products

Accessory products to assist with splice rejacketing, cable jacket sealing, grounding and cable preparation. Many of the products in this section are used with 3M™ Splices and Terminations.

Miscellaneous Cable Accessory Products

Outage Protection Products

Outage Protection Products

3M™ Conductor Covers CCI Series are extruded silicone rubber tubes designed for field installation over bare conductors to insulate them from adjacent phases, grounded equipment, and animal contact.

View All Outage Protection Products

Splice Repair Kit

Splice Repair Kit

Our Scotch® Lead Sheath Repair Kit is used for sealing oil leaks on paper insulated lead covered cable. For Heat Shrink Wraparound Cable Repair Sleeves please refer to our dedicated Heat Shrink section.

Splice Repair Kit

Sealing and Grounding Kits

Sealing and Grounding Kits

Sealing and Grounding KitsCold shrink cable accessory sealing kits are designed to seal the end of various cable types. Use these kits when installing elbows or other cable accessories that do not include a jacket seal. 3M also offers three types of sheath sealing or breakout kits; poured resin, cold shrink and heat shrink, several heat shrink cable sealing end caps and a variety of grounding hardware.

Cable Breakout Boots and Phase Rejacketing System

Cable Breakout Boots and Phase Rejacketing System

3M™ Cold Shrink Silicone Rubber 3/C Cable Breakout Boots 8560 Series and 3M Silicone Rubber RJS Series 3/C Phase Rejacketing Systems are designed to be used in conjunction with 3M™ Terminations, to seal the breakout area and rejacket the phases on three conductor cable without grounds.

Sheath Seal Kits

Sheath Seal Kits

3M™ Sheath Seal Kits are designed to seal the sheath area for multi-conductor cables with or without ground wires. Choose the one that applies most to you. These kits handle copper or aluminum cable from 2 AWG–500 kcmil (35–250 mm²).

View All Sheath Seal Kits

Electrical Resins

Electrical Resins

3M™ Resins provide a reliable, durable moisture barrier in a variety of applications, above ground or below, permanent or re-enterable, wet locations or dry.

View All Electrical Resins

Mounting Brackets

Mounting Brackets

Designed to mount 3M Molded Rubber Terminations, the 3M™ Brackets MB Series are made from galvanized steel, and the 3M™ brackets MBS Series are made from stainlesssteel to provide corrosion protection in highly contaminated environments. These brackets are attached to the cable just below the termination.

View All Mounting Brackets

Cold Shrink Corrosion Protection Kits

Cold Shrink Corrosion Protection Kits

The 3M™ CPT Series Cold Shrink Kits are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.

View All Cold Shrink Corrosion Protection Kits

Cold Shrink End Caps

Cold Shrink End Caps

3M™ Cold Shrink End Caps are close-ended, tubular rubber sleeves that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object the core is removed to provide a reliable environmental seal.

View All Cold Shrink End Caps

Preparation and Cleaning

Preparation and Cleaning

Select Scotch-Brite™ Pads for your abrasion needs and carry them with you everywhere you work. You can use them on various surface materials such as: all kinds of metals, plastics, composites, ceramics, porcelain, glass and rubber. 3M™ Cable Cleaning System CC Series cleans cable insulation, metal, electrical and mechanical parts. It is also suitable for use on transformers, generators, motors and metal parts of all sorts. It removes surface oils, tars and heavy greases.

View All Preparation and Cleaning Products