Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS Off-White, 35 mL, 12 per case

3M ID  62279804306    UPC#  00021200963094    3M Product Number  DP8010NS     
3M(TM) Scotch-Weld(TM) Structural Plastic Adhesive DP8010NS
3M(TM) Scotch-Weld(TM) Structural Plastic Adhesive DP8010NS
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS is a non-sag, two-part acrylic-based adhesive. 10:1 mix ratio, 10 minute work life and handling strength in approximately 2 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).
  • Structurally bonds polyolefins without surface preparation
  • Non-Sag formulation
  • General industrial, metal working, maintenence, repair, construction equipment, agricultural equipment, plastic and rubber industry, medical, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace.
  • Bonding, gluing, joining, attaching, assembling, encapsulating, potting and sealing.
  • Need Help?

    Questions? We can help

    Contact Us

     

    Overview

    Specifications

    BrandScotch-Weld
    Chemical BaseAcrylic
    ColorOff-White
    Consumer LabelNo
    Container Volume35 Millilitre
    Full Cure8-24 hours @ 72 F (22 C)
    Hardness60 Shore D
    Industry - UseConstruction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military & Government, MRO, Specialty Vehicle, Transportation
    Mix Ratio Volume Base:Accelerator10 : 1
    Peel Strength at 72 Degrees F (22 Degrees C)17 Pound Per Inch (Of Width)
    Physical FormFlowable Liquid
    Product FormEach
    Shear Strength at 72 Degrees F (22 Degrees C)2400 Pound-Force Per Square Inch
    Shelf Life6 Month
    Specific Gravity1.04
    Storage Temperature<=40 Degree Fahrenheit
    Substrate 1Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Wood & Hardboard
    Substrate 2Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Wood & Hardboard
    Time to Handling Strength2 Hour
    TypeStructural Plastic Adhesive
    Units per Case12
    Viscosity Range (cps) at Room Temperature65,000
    Worklife10 minutes @ 72 F (22 C)