Cable Accessory Products
Accessory products to assist with splice rejacketing, cable jacket sealing, grounding and cable preparation. Many of the products in this section are used with 3M™ Splices and Terminations.
Outage Protection Products
3M™ Conductor Covers CCI Series are extruded silicone rubber tubes designed for field installation over bare conductors to insulate them from adjacent phases, grounded equipment, and animal contact.
View All Outage Protection Products
Splice Repair Kit
Our Scotch® Lead Sheath Repair Kit is used for sealing oil leaks on paper insulated lead covered cable. For Heat Shrink Wraparound Cable Repair Sleeves please refer to our dedicated Heat Shrink section.
Sealing and Grounding Kits
Sealing and Grounding KitsCold shrink cable accessory sealing kits are designed to seal the end of various cable types. Use these kits when installing elbows or other cable accessories that do not include a jacket seal. 3M also offers three types of sheath sealing or breakout kits; poured resin, cold shrink and heat shrink, several heat shrink cable sealing end caps and a variety of grounding hardware.
Cable Breakout Boot Kits
The 3M™ Cold Shrink Three Conductor Breakout Kit includes everything you need to convert three-conductor cable to three single conductors; ultimately, this offers you much greater flexibility for 3/C medium voltage applications – especially in tight spaces. The breakout Kits can be used with various cable accessories, including 3M™ Terminations, 3M™ T-Bodies and 3M™ Push-On Elbows.
Sheath Seal Kits
3M™ Sheath Seal Kits are designed to seal the sheath area for multi-conductor cables with or without ground wires. Choose the one that applies most to you. These kits handle copper or aluminum cable from 2 AWG–500 kcmil (35–250 mm²).
View All Sheath Seal Kits
3M™ Resins provide a reliable, durable moisture barrier in a variety of applications, above ground or below, permanent or re-enterable, wet locations or dry.
View All Electrical Resins
Designed to mount 3M Molded Rubber Terminations, the 3M™ Brackets MB Series are made from galvanized steel, and the 3M™ brackets MBS Series are made from stainlesssteel to provide corrosion protection in highly contaminated environments. These brackets are attached to the cable just below the termination.
View All Mounting Brackets
Cold Shrink Corrosion Protection Kits
The 3M™ CPT Series Cold Shrink Kits are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.
View All Cold Shrink Corrosion Protection Kits
Cold Shrink End Caps
3M™ Cold Shrink End Caps are close-ended, tubular rubber sleeves that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object the core is removed to provide a reliable environmental seal.
View All Cold Shrink End Caps
Preparation and Cleaning
Select Scotch-Brite™ Pads for your abrasion needs and carry them with you everywhere you work. You can use them on various surface materials such as: all kinds of metals, plastics, composites, ceramics, porcelain, glass and rubber. 3M™ Cable Cleaning System CC Series cleans cable insulation, metal, electrical and mechanical parts. It is also suitable for use on transformers, generators, motors and metal parts of all sorts. It removes surface oils, tars and heavy greases.
View All Preparation and Cleaning