Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Maintenance Sorbent Pillow M-PL715, Environmental Safety Product, High Capacity, 16 ea/cs

M-PL715 Sorbent Pillow
Click to Enlarge

Maintenance sorbent pillows are designed with a scrim that encases particulate sorbent material. Used in areas where greater capacity than a sorbent pad is desired. Small and lightweight, pillows are tear-resistant.

These pillows have a high capacity for holding liquid. Ideal for use in a drip pan, under equipment or at the source of a leak. Each case contains 16 pillows (each 7 inch by 15 inch) which will sorb 0.5 gallons.


Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations.
Sorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.

3M ID: 70-0703-1360-9
GTIN(UPC/EAN): 5 00 51138 21531 1
TitleContent TypeFile TypeSize

3M™ Maintenance Sorbents

Data Sheet


27 KB

Sorbents For Maintenance, Petroleum, and Chemicals



2.9 MB