Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Petroleum Sorbent Mini-Boom T-8, Environmental Safety Product, 6 ea/cs

T-8 Petro Sorbent Mini-Boom
Click to Enlarge

Petroleum sorbent mini-booms are used to encircle spills and to contain leaks and are a selective sorbent which will "sorb" hydrocarbon-based liquids (oleophilic) and repel aqueous-based liquids (hydrophobic). .

A 3 inches diameter scrim on the outside of the boom identifies the use while containing particulate sorbent material. The T-8 mini-boom is 8 feet in length. A case weighs 12 pounds.Each case contains 6 booms (each 3 inches in diameter by 8 feet) which will sorb 2 gallons each.


Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations.
Sorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.

3M ID: 70-0702-2137-2
GTIN(UPC/EAN): 5 00 51138 21355 3
TitleContent TypeFile TypeSize

3M™ Petroleum Sorbents, Technical Data Sheet

Data Sheet


278 KB

3M™ Spill Management Brochure



2.93 MB