Narrow By

Categories

• All 3M Products (25)

Adhesive Size

• 5/8 in x 2 in (1)

Aerosol Type

• Adhesive (1)

Application Method

• It is dispensed with 3M(TM) Scotch-Weld(TM) Hot Melt Applicator TC Q and EC. (2)
• Spray (2)
• Brush, flow (1)

Bead Open Time

• 35 Second (1)
• 40 Second (1)

Bonding Range (One Surface)

• 1 to 15 minutes (1)
• Up to 40 minutes (1)

Breakaway Torque Strength

• 70 to 160 Pound (1)

Can Size

• 24 Ounce (1)

Chemical Base

• Ethyl (2)
• Acrylic (5)
• Dimethacrylate (1)
• Epoxy (2)
• Etylene Vinyl Acetate (2)

Color

• Clear (5)
• Off-White (1)
• Yellow (2)
• Tan (3)
• Light Yellow (1)
• more...

Consistency

• Medium liquid (1)

Container Volume

• 1 Fluid Ounce (US) (2)
• 11 Pound (2)
• 35 Millilitre (2)
• 47 Millilitre (1)
• 50 Millilitre (3)
• more...

Container Volume (metric)

• 35 Milliliter (1)
• 50 Milliliter (1)

Density

• 8.7 Pound Per Gallon (US) (2)

Design Challenges

• Improving Design (2)
• Lightweighting (2)
• Thermal Management (1)
• Usability and Accessibility (2)

Environmental Considerations

• California Air Resources Board (1)
• GREENGUARD(R) Certified (1)
• Helps contribute to LEED(R) credits (1)
• Ozone Transport Commission (2)
• SCAQMD (1)

Flammability Rating - USA

• UL94 HB (2)
• ASTM E162 (1)
• ASTM E662 (1)
• Boeing BSS 7239 (1)

Full Cure

• 24 Hours @ 72 F (22 C) (3)
• 24-48 Hours @ 72 F (22 C) (2)
• 8-24 Hours @ 72 F (22 C) (5)

Hardness

• 80-85 Shore D (1)
• 79 Shore D (1)
• 83 Shore D (1)
• 60 Shore D (2)

Heat Resistance

• <230 Degree Fahrenheit (1)
• 130 temperature (1)
• 140 temperature (1)

Heat Resistance Range

• Low (2)

Industries

• Construction (13)
• Electronics (13)
• General Industrial (15)
• Transportation (19)
• Consumer Goods (13)
• more...

Length (Metric)

• 0.2 Linear Metre (2)

Manufacturing Challenges

• Ease of Assembly (5)
• Improved Quality Control (5)
• Increased Production Throughput (3)

Material

• Plastic (1)

Meets Specifications

• ASTM E-84 (1)
• FMVSS 302 (1)
• UL 723 (1)
• UL 94 Listing V2 (2)

Mix Ratio Volume Base:Accelerator

• 1 : 1 (5)
• 10 : 1 (2)

Net Weight

• 1 Dry Quart (US) (1)
• 17.6 oz (1)
• 26.2 Pound (1)

Open Time Range

• Medium (2)

Operating Temperature

• Hot Melt (1)

Output (lbs per hour)

• 2.6 - 3.5 (1)

Peel Strength at 72 Degrees F (22 Degrees C)

• 10 Pound Per Inch (Of Width) (1)
• 17 Pound Per Inch (Of Width) (2)
• 2 Pound Per Inch (Of Width) (1)
• 30 Pound Per Inch (Of Width) (2)
• 35 Pound Per Inch (Of Width) (1)

Physical Form

• Liquid (3)
• Paste (1)
• Flowable Liquid (6)

Prevailing Torque Strength

• 20 to 90 Pound (1)

Product Category

• Adhesive Dispensers, Applicators & Accessories (1)
• Non-Structural Adhesives (1)
• Structural Adhesives (9)
• Maintenance (6)

Product Collection

• Government Markets (6)

Product Form

• Bottle (3)
• Can (1)
• Each (11)
• Pound (2)
• Quart (1)
• more...

Shear Strength at 72 Degrees F (22 Degrees C)

• 1500 Pound-Force Per Square Inch (2)
• 1700 Pound-Force Per Square Inch (1)
• 2400 Pound-Force Per Square Inch (2)
• 3500 Pound-Force Per Square Inch (2)
• 3600 Pound-Force Per Square Inch (2)

Shelf Life

• 12 Month (3)
• 15 Month (2)
• 6 Month (2)
• 9 Month (3)

Size

• Aerosol (1)
• Large cylinder (1)
• Q (2)

Solids Weight Percent (Approximate)

• 100 Percent (3)
• 25 Percent (1)
• 28.2 Percent (1)
• 32 Percent (1)

Specific Gravity

• 0.99 (2)
• 1.04 (1)
• 1.07 (2)
• 1.14 (1)
• 8.7 Pound Per Gallon (US) (2)
• more...

Storage Temperature

• <=40 Degree Fahrenheit (3)
• 40 Degree Fahrenheit (1)
• 72 Degree Fahrenheit (6)

Strength Requirements

• High Strength (2)

Sub Industries

• Bus (2)
• Circuit Boards & Components (1)
• Dryer (1)
• Rail Transit (2)
• Truck (1)
• more...

Substrate 1

• Glass & Ceramics (10)
• Metal (12)
• Plastics (ABS, PVC, Acrylic) (11)
• Plastics (High Performance Nylon) (11)
• Wood & Hardboard (10)
• more...

Substrate 2

• Glass & Ceramics (10)
• Metal (12)
• Plastics (ABS, PVC, Acrylic) (11)
• Plastics (High Performance Nylon) (11)
• Wood & Hardboard (10)
• more...

Time to Handling Strength

• 10 Minute (3)
• 2 Hour (1)
• 3 Hour (1)
• 20 Minutes (1)

Type

• Epoxy Adhesive (2)
• Instant Adhesive (2)
• Thread locker (1)
• Acrylic Adhesive (3)
• Structural Plastic Adhesive (2)

Viscosity Range (cps) at Room Temperature

• 110,000 (1)
• 13,000 (1)
• 20,000 (1)
• 25,000 (1)
• 400-600 (1)
• more...

Volatile Organic Compounds (VOCs)

• 54 Percent (1)
• 79 Grams Per Litre (1)

Width

• 0.62 Inch (2)

Width (Metric)

• 15.74 Millimetre (2)

Worklife

• 3 minutes @ 72 F (22 C) (2)
• 5 minutes @ 72 F (22 C) (2)
• 10 minutes @ 72 F (22 C) (3)

Business

• Industrial & Transportation Bus (19)

Corporate Division Code

• AD (19)

Global Basic Commodity Code(Product)

• 1620 (13)
• 2450 (1)
• 3280 (2)
• 4030 (3)

Length

• 8 Inch (2)

National Stock Number

• 5120015520154, 5120015604251 (1)
• 5120015520155, 5120015601912 (1)
• 8040011261422, 8040008394919 (1)
• 8040014935716 (1)
• 8040015009989 (1)
• more...

Marketplace Formal Name

• 3M(TM) Scotch-Weld(TM) EPX(TM) Plus II Applicator W 2:1 and 1:1 Plunger Model 91 (1)
• 3M(TM) Scotch-Weld(TM) EPX(TM) Plus II Mixing Square Nozzle Gold, 5.3 mm, 12 per bag (1)
• 3M(TM) Scotch-Weld(TM) Hot Melt Applicator TC with Quadrack Converter and Palm Trigger, 1 per case (1)
• 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS Tan, 1.7 fl oz/50 mL, 12 per case (1)
• 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS Off-White, 1.18 fl oz/35 mL, 12 per case (1)
• more...

SNAPS Placement

• Industrial Adhesives & Tapes (2)

Solution

• constructioncontactres (1)
• constructionspray (1)