Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Mixing and Dispensing Equipment

AC-885 Portable Electric Mixer

The Model #885 is an electric portable mixer that was designed to assist with mixing 2-part adhesives and sealants. The mixer is built with an automatic timer which will shut the motor off when the predetermined amount of time expires. The operator attaches the cartridge of material to be mixed by engaging the spindle pins into the dasher rod holes. When the switch is turned to "MIX", the spindle turns, thus turning the mixing blade inside the cartridge. The operator firmly holds the cartridge, without squeezing, and moves it up and down which will cause the blade to move up and down the length of the cartridge, while turning and mixing the material very thoroughly. The advantage of using the Model #885 Portable Mixer is that the material gets a more thorough and consistent mix from batch to batch.

3M Aerospace sealant portable electric mixer.

AC-900 Automatic Mixer

The Model #900 is an automatic 2-part mixer specifically built for TechKit packages, adhesives and sealants. The mixer is built with an automatic timer which will shut the motor off when the predetermined amount of time expires. The operator attaches the cartridge of material to be mixed by engaging the spindle pins into the dasher rod holes. When the timer is set to material manufacturer’s mixing instructions, and switch is turned to "MIX" position, the Model #900 Automatic Mixer will rotate and actuate the mixing blade inside the cartridge automatically. The Model #900 Automatic Mixer eliminates operator fatigue and ensures a more consistent mix of material each time. The Model #900 Automatic Mixer has a smooth, quiet, high quality induction motor.
 

Manual Dispensing Gun

The Model #855 Manual Dispensing Gun is a high quality, hand operated dispensing gun manufactured to dispense material packaged in Techon and other similar type cartridges. There is no need for air supply, which makes use of this gun convenient and easy to operate. The gun is made of sturdy, yet lightweight, powder coated metal with comfortable, rubber-covered grip handle. The rivet style retainer makes changing the cartridges quick and easy with just a quick twist. The gun has built-in tip cutter for added convenience.

Roll On Nozzles

These Roll On Nozzles are made from durable, precision plastic injected material with a nylon nap made specifically to apply adhesives and sealants over a larger area. Choose between a 1" or 2" size width of nozzle depending upon your application requirements. Roll-On Replacements are also available. Each and every component is made and assembled in the USA.