Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

Adhesive Films

Thermosetting adhesive films commonly used for structural bonding applications.
Quick Clicks
Product Documentation
Product Information
3M™ Scotch-Weld™ 250 Degree F Cure Epoxy Films
The high peel strength epoxy technology pioneered by 3M for low temperature/low pressure curing adhesive films is now standard throughout the industry for bonding skins to honeycombs.
3M™ Scotch-Weld™ 350 Degree F Cure Epoxy Films
3M™ Scotch-Weld™ 350 Degree F Cure Epoxy Films
Adhesive films designed for long-term durability on honeycomb and metal to metal components where high strengths at 350°F (177°C) are required.
3M™ Scotch-Weld™ AF 3070 FST Core Splice Films
Dual-cure 120c or 180c curing, low-density, expandable product for these applications: honeycomb sandwich edge finishing, filling mismatched areas, and core splicing and reinforcing honeycomb core.
3M™ Scotch-Weld™ Composite Surfacing/Lightning Strike Adhesive Films
3M™ Scotch-Weld™ Low Density Composite Surfacing Films are thermosetting, laminated metal foil films that adheres to cold and release coated tools.
3M™ Scotch-Weld™ Nitrile Phenolic Structural Adhesive Films
3M™ Scotch-Weld™ Nitrile Phenolic Structural Adhesive Films
Nitrile phenolics can outperform epoxies at high temperatures and provide greater strength retention at temperatures above 400 degrees F (240 degrees C).
3M™ Scotch-Weld™ Thermoexpandable Adhesive Film AF 3090 TEF
Highly toughened, epoxy-based thermo-foaming film system, co-curable with composite material and designed for edge finish of sandwich panels and complex gap filling.